restoration of rain damages on mandhole to magouta road km 0/00 to 8/645 sh hiring of excavator cum loader for removal of slip and dressing of road etc as and when required and hiring of tipper for carriage of debries and co unlined drain maintenance of eathen shoulder etc. between km 0/00 to 8/645 at various rds , hiring of j.c.b(excavator-cum-loader)including p.o.l charges, shifting charges and other anciliary equipments as required at site of work for removal of slipsin all heights in all kinds of soil such as kankar, moorum shingle boulders decomposed or soft variety of soil such as spade work, pick work, jumper work, soft rock, hard rock including their intermediate classification of soil including mechanical transportation if necessary. the disposal of this un-serviceable material has to be done in the acquired width of the road to avoid damage to the properties of the people or in case any damage took place, the contractor is liable for it. all salvaged material such as quarried stone shall belong to the department and maximum useful quantity of stones from removal of slips shallhave to be neatly stacked along road side on road burms. the work shall have to be carried out as per ministry of transport as per instructions of the engineer-in-charge including all leads and lifts. , hiring of tipper for carriage of materials including p.ol charges, shifting charges and other ancillary equipments as required at site of workto dumping place.the work shall have to be carried out as per ministry of transport specifications as per instruction of engineer-in-charge including all leads and lifts with the capacity of 10cum. , construction of unlined surface drains of average cross-sectional area 0.40 sqm in soil to specified lines graders levels and dimensions.excavated material to be used in embakment with a lift upto 3 mand lead of 50 m ( average lead 25 m) including all leads and lifts as per technical specification directed by theengineer-in-charge , mantenance of earthen shoulder (filling with fresh slected soil) making up loss of material/irregularities on shoulders to the design level by adding fresh approved slected soil and compecting it with appropriate equipment at omc upto a lead of 1000 m as per technical specification clause 1903 including all leads and lifts as per direction ofengineer-in-charge