bids are invited for rewiring pmu panel - disconnecting and removing of all existing pmu control wiring cleaning and rewiring with 1.5 sq.mm pvc insulated copper wire for control wiring and wiring with 10 sq.mm pvc insulated copper wire for extending power supply between rotary changeover switch mccb power contactor etc inside amf control panel including making termination with copper lugs making connections testing commissioning etc as reqd. , sitc of components for amf panel - supplying and fixing of the following items in the existing panel for the smooth functioning of the dg in auto mode including connection testing and commissioning etc as reqd amf controller make deepsea 4520 or similar bsnl approved make , mccb - 4 pole 100a 30ka mccb l and t du 100 h or similar bsnl approved make , power contactor - 63 amps 4 pole power contactor with addon block with 2 no and 2 nc l and t mcx 12 , push button - push button switch for on off , relay - 12v relay , rotary selector switch - 63 amps 4 pole 4 way with centre off rotary selector switch make salzer , 3 way selectro switch - 6 amp 3 way with centre off rotary selector switch l and t or similar bsnl approved make , mcb - 6a 230v c series sp mcb , cable - supplying laying fixing of one number pvc insulated and pvc sheathed xlpe al. armoured power cable of 1.1kv grade of 4 c 25sq.mm in following ways including transportation etc as required. direct in ground including excavation and refilling the trench etc as required but excluding sand cushioning and protective covering. , on surcafe - on surface of wall clamped with 1mm thick saddle , mosonry duct - in masonry open duct or loose in panel , cabl end termination - supplying and making end termination with brass compression gland and aluminium lugs for following size of pvc insulated and pvc sheathed xlpe aluminium conductor cable of 1.1 kv grade as required 4x25 sq.mm 28mm total quantity : 235