tender for panting work of panel room/boundary wall of undasa filter plant.- painting wood work with deluxe multi surface paint of required shade. two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/ 10 sqm of approved brand or manufacture13.46.2/164 2 painting steel work with deluxe multi surface paint to give an even shade. two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture13.46.3/164 3 painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces:13.48.2/164 4 finishing with epoxypaint (two or more coats) at all locations prepared and applied as per manufacturers specificationsincluding appropriate priming coat, preparation of surface, etc. complete.13.49.1.2/164 5 on steel work 6 on concrete work 7 applying priming coat:with ready mixed red oxide zinc chromate primer of approvedbrandandmanufactureonsteelwork(second coat)13.47.4/164 8 painting on g.s. sheet with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : new work (twoormorecoats) including a coat of approved steel primer butexcluding acoat ofmordant solution.13.50/165 9 painting with black anti-corrosive bitumastic paint ofapprovedbrand and manufacture to give an even shade: two or more coats on new work.13.59/165 10 providing and applying 1.0 mm thick white cement based wall putty of best quality, over plastered surface to prepare the surface even and smooth complete.13.25/162