tender for general repair and painting work in houses number 3, 6 and 17 located in gautampalli colony. - dismantling old plaster or skirtingracking out joint and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metars lead. dsr no-15.56, 2 12 mm thick cement plaster with cement mortar in proportionof mix 1:4 (1 cement : 4 coarse sand). dsr-13.4.1, 3 removingwhiteorcolourwashbyscrappingandsandpaperingandpreparingthe surface smoothincluding necessary repairs to scratches etc. complete.dsr-13.88, 4 providing and applying white cement based putty of average thickness1mm.of approved brand and manufacture. over the plastered wall surface to prepare the surface even and smooth complete. (dsr-13.80), 5 finishingwallwithpremiumacrylicsmoothexteriorpaintwithsiliconeadditivesof requiredshadeold work.([email protected]/10sqm)overexisting cement paint surface. (dsr-13.112.1), 6 wallpaintingwithacrylicemulsionpaint,havingvoc(volatile organiccompound) content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. two coat, dsr.n0- 13.82.2), 7 paintingwith synthetic enamal paint of approved brand and manufactorar of required colour to give an evan shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture dsr no. 13.62.1 8 structual steel work riveted bolted or welded in built up section, trusses, builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. sl.n0-10.2, 9 providing and fixing in wall lining flat pressed three layer (medium density) particle board or graded wood pre-laminated one side decorative lamination and other side balancing lamination grade i, type ii, is : 12823 marked, including priming coat on unexposed arrangement and screws etc. complete : 18 mm thick dsr 8.26.2 10 dismantling tiles work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25mm. dar 15.23.1 11 providing and laying rectified glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to is: 15622 of approved make in colours white, lovry greyfume red brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 12 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to is:15622, of approved make, in all colours & shades, ln skirting riser of steps, laid with cement based high polymer modified quick set tile adhesive lncluding (water based) conforming to ls 15477, ln avrage 6 mm thikcness, including grouting of joint (polyment fo grouting of jonits to be made separately). size of tile 600x600 mm. (dar-11.47.2)