tender for replacement of damaged doors and other necessary minor repairs at vikramaditya marg new ministers residence no. 1- 1 dismantling doors, windows and clerestory window (steel or wood) shutter including chaukhat, architrave, holdfast etc. complete and stacking within 50 meters lead of area 3 sqm and below. dsr.no-15.12.1, 2 providing wood work in frame of doors, window, clerestory window and other frames, wrought framed and fixed in posotion with hold fast lugs or with dash fasteneres of reqiured dia & lenght (hold fast lugs or dash fastener shall be paid of separately (second class teak wood, dsr-9.1.1, 3 fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of engineer-in-charge. door chowkhats each dsr-14.2.1, 4 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws. dsr n0-9.20.1, 5 providing and fixing float glass panes 4.0 mm thick (weight not less than 10.00 kg/sqm), (dsr-9.7.7.1) 6 providing and fixing wire gauge shutter using galvanized m.s. wire guage of average width of aperture 1.4 mm in both directions with wire of dia 0.63, for doors, window and clerestory windows with hinges and necessary screws : 35, mm thick shutter with isi marked m.s. pressed butt hinges bright finished of required size second class teak wood jali door. dsr no-9.27.1.1, 7 providing and fixing of 1 mm thick m.s. sheet door with frame of 40x40x6 mm angle lron and 3 mm m.s gusset plates at the junction and corners all necessary fittings complete, including applying a priming coat of approved steel primer. using m.s. angles 40x40x6 mm for diagonal braces using flats 30x6mm for diagonal braces and central cross piece, dsr n0-10.5.1, 8 supply and fixing of stenless steel door and window fittings as sliding bolt, tower bolt, handels etc. complete as direction of i/c. 9 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. dsr.n0-13.62.1), 10 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. note - item to be applicable in urban areas having directions for restricted hours for movement /plying of load carrying motor vehicle of 3.5 cum or more. dar-1.1.18, please enable macros to view boq information