tender for complete renovation of one bathroom and other necessary works in residence no. 95b located in vidhayak niwas-1. - dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tiles 10 mm to 25 mm. d.a.r no-15.23.1 2 dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. d.a.r no-15.56 3 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). d.s.r no-13.5.1 4 providing and fixing chlorinate polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer-in-charge internal work-exposed on wall. 25mm nominal outer dia pipes (dsr no-18.7.3) 5 providing and fixing clorinate polyvinyl chlorode (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of engineer-in-charge concealed work including cutting chases and making good the etc. 20 mm nominal outer dia pipes dsr no- 18.8.2 6 providing and fixing of cpvc gate valve of 25mm dia nominal size of approved quality as per directed by engineer-in-charge. 7 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 75 mm diameter.(d.s.r-12.41.1) 8 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.single tee without door 75x75x75 mm.(d.s.r-12.42.4.1) 9 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5° 75 mm bend.(d.s.r-12.42.5.1) 10 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.shoe (plain)75mm.(d.s.r-12.42.6.1) 11 providing and fixing on wall face unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion, (i) single socketed pipes. 110 mm diameter.(d.s.r-12.41.2) 12 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. coupler 110mm (d.s.r-12.42.1.2) 13 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.single tee without door 110x110x110 mm.(d.s.r-12.42.4.2) 14 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. bend 87.5° 110 mm bend.(d.s.r-12.42.5.2) 15 providing and fixing on wall face unplasticised - pvc moulded fittings/ accessories for unplasticised rigid pvc rain water pipes conforming to is : 13592 type a, including jointing with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion. with seal ring conforming to is : 5382, leaving 10 mm gap for thermal expansion.shoe (plain) 110mm.(d.s.r-12.42.6.2) 16 providing and fixing of nahani trap tee of 110mm dia nominal size of approved quality as per directed by engineer-in-charge. 17 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.all work up to plinth level. 1:2:4 (1 cement 2coarse sand (zone-iii) 4 graded stone aggregate 20 mm nominal size). dsr no- 4.1.3 18 making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zonei) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(d.s.r-4.17) 19 providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to is : 15622 of approved make in all colours shades except white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (d.s.r no- 11.38) 20 providing and fixing ist quality ceramic glazed wall tiles conforming to is: 15622 (thickness tobe specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (d.s.r-8.31) 21 providing and fixing water closet squatting pan (indian type w.c. pan) with 100mm sand cast iron p or s trap, 10 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. white viterous china orissa pattern w.c. pan of size 580x440mm with integral type foot rest. (dsr- 17.1.1) 22 providing and fixing of white glazed earthen ware wash hand basin with without pedestal ( 22x16 ) with c.p jali, c.p pilar cock, c.p angle valve ,pvc connection 15mm dia 450mm long including supply of all materials labour t&p etc. required for proper completion of the work. 23 providing and fixing c.p. brass shower heavy quality or eqv.) with 15mm inlet:100 mm diameter 24 providing and fixing cp brass towel rail 750x20mm together with pair of cp brass brackets to fit the towel rail complete 25 providing and fixing c.p. brass long body bib cock of approved quality conforming to is standards and weighing not less than 690 gms. 15 mm nominal bore. (d.s.r- 18.51.1 ) 26 providing and fixing c.p. soap dish including supply of all material , labour t&p etc. complete. 27 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete.(dsr.17.31) 28 distempering with 1st quality acrylic distemper(ready mixed )having voc (volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .dsr-13.81 29 painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (dsr-13.99.1) 30 providing and fixing up to floor five level precast cement concrete string or lacing courses, coping, bed plates, anchor, blocks plain window sills, shelves, louvers, steps, stair cases etc. including hoisting and setting in position with cement mortar 1:3 (1 cement 3 coarse sand), cost of required centering complete. 1.1.5.3(1 cement 1.5coarse sand (zone-iii) 3 graded stone aggregate 20 mm nominal size).d.s.r no-4.5.1 31 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete above plinth levelfor thermo-mechanically treated bars of grade fe-500d or more (dsr vol-1, 5.22a.6) . 32 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. dsr-1.1.18