tender for interlocking tiles road construction work from madan flour mill to lala jis dairy in ward-22 golabad - construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads,transporting to site,speading,grading to required slope and compacted to meet requirement of 2 (gsb)construction of granular sub baseproviding well graded material spreading in uniform layers with tractor mountgrader on prepared surface, mixing by mix in place method with rotavator at omc , and compacting with smooth wheeel roller to achieve the desired density , complete as per clause 401 by mix in place method, laying, spreadingmaterial on a prepared sub base, 3 m150 ist class brick work in 1:4 cement and coarse sand in foundation and plinth including all complet work.s.i.no 305a 4 12 mm thick cement palster 1:4 with cement and coarse sand mortar over brick work including all complete work.s.i. no. 584 (a) 5 cement concrete with 2 cm gauge approved stone grit, c/sand & cement in proportion of 4:2:1 as per si no. 279 (a) 6 construction of granular sub baseproviding well graded material spreading in uniform layers with tractor mountgrader on prepared surface, mixing by mix in place method with rotavator at omc , and compacting with smooth wheeel roller to achieve the des 7 (g-3)providing, laying spreding & compacting machine crushed stone ballast of approved quarry of hand packing rolling with power roller 8 to 10 tone in stage to proper grade and camber applying and brooming with type b 11.2mm stonescreening material bund to protect edges,ligting guarding barricading etc.i/c cost of material labour t & p etc. 8 supply of 80mm thick precast cement concerete i-shape interlocking paver blocks with top layer of minimum 8mm thickness having plan dimension 200x(160+120mm) of o.p. cement smooth high gloss finish skid resistant manufactured from rubber moulds through vibro cmpression mechanism. grey colour as per s.i.no. new item no-14 4.5 kg each &40mpa 9 rcc work with cement apporved coarse sand & 2 cm gauge approved grit stine in proportions of 1:1.5:3 in slab excluding supply of reinforcement and its bending but including its fixing and bending the same with 24 b.w.g.g.i, binding wire and including necessary centering and its shuttering etc. and supply. 10 m.s or iron in plain work such as rcc oe reinforced brick work (s.l no.-504) 11 pro/fixing of m.s. sign board (weight 50.51kg.) made up of 40x40x6 mm3 angle iron (vertical post of length 2.75 m) 40x5 sq mm flat cross angle, 1mm thick m.s. sheet (1.2x0.90 sqm) including excavation of pit (0.45x0.45x0.45 m3), 10cm thick cement concrete 10:5:1 with brick ballast, fine sand cement,cast cement conrete 1:2:4 with cement c/sand & 20mm stone gritt (0.35x0.35x0.35 m3) both sid, two coat painting, letter writting upto 2.5 cm size(225nos) etc complete as per standard drwaing & direction of e/i.