tender for the work of reconstruction of 11/lt kv lines in m & r scheme which fallen due to different reason under edd-iii sasni - safe carriage of following material from electricty store center hathras to pit site of work through the kacha and pakka road includingloading and unloading at the respective ends including the cost of arrangement of labour, t&p, etc. which required for proper completion of work.(distance 00-50 kms.) 2 8.5 mtr. long pcc poles. 3 11 kv x-arms, weasal conductor, g.i wire,disc insulators, pin insulators, clamps and otherrequired line material, if any. 4 replacement of damaged 8.5 mtr. long pcc pole by digging of pits in kharanja/mettalic road with grouting and dismantling of all 11kv/lt accessories from the existing / damaged pole and errection of single new pole including fixing of all accessories. 5 straightening of tilted single pcc poles in the existing lines as per direction of supervising engineer. 6 replacement offollowing damaged accessories in 11 kv /ltline - 7 11 kv x-arms, 11 kv pin insulators with pin &nut &bolt , f clamp 8 11 kv disc insulator with fiting 9 fixing of t. channel 10 errection and grouting of stays complete as per respo norms and as per direction of supervising engineer with grouting material i.e. cement, sand, brick ballast/stone ballast etc. shall be arranged by the contractor at his own cost. 11 fixing of earthing rodas per respo norms and as per direction of supervising engineer. 12 laying, sagging and stringing and nozzling / binding etc. ofnew &old acsr weasal conductor / giin 11 kv / lt lines as per respo manual and as per direction of supervising engineer. 13 acsr weasel conductor 14 providing & filling of cable jointing kit per respo manual and as per direction of supervising engineer. 15 providing & filling of cable straight through per respo manual and as per direction of supervising engineer. 16 re- sagging and stringing of existing following conductor in ht /lt line as per direction of supervising engineer. 17 acsr weasel conductor 18 cutting, chopping, triming of tree branches to clear the line route to give2 mtr. horizontal and vertical clearance to the line coming in the route ofdifferent feeders as per direction of supervising engineer