tender for making varandah front of co-operative bank and resi. no. sa-9 at canal colony, cantt road, lucknow. - centering and shuttering for rcc work including rent of shuttering,material,labour and t&p required for proper complition of work for slab and wall etc. 2 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. thermo-mechanically treated bars of grade fe-500d or more. 3 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cementincluding cement slurry, but excluding the cost of nosing of steps etc . complete. 40mm thick with 20mm nominal size stone aggregate. 4 brick work with common burnt clay non modularbricks of class 150 in superstructure above plinth level up to floor v level in all shapes and sizescement mortar 1:4 (1 cement : 4 coarse sand) 5 cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cementincluding cement slurry, but excluding the cost of nosing of steps etc . complete. 40mm thick with 20mm nominal size stone aggregate. 6 12mm cement plaster in sigle coat on top of slab in single storey building finished even & smooth 1 cement : 4 coarse sand including all l/m, t&p etc. 7 providing and applying white cement based putty ofapproved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete . 8 one priming coat & one coat oil distemper on new work including supply of all materials, labour and t & p etc required for proper completion of the work . 9 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. (a) 35 mm thick including isi marked stainless steel butt hinges with necessary screws 10 painting or varnishing on iron work in small areas or new wood work with one coatof ready mixed paint & two coat of approved superior quality ready mixed paint of clear synthetic varnish including supply of all materials, labour and t&p etc required for proper completion of work 11 providing and fising 1 qualiity ceramic glazed wall tiles conforming to is: 15622 (thickness to be specified by the manufacturer)of approved make in all colours, shades except burgundy, botlle green, black or any size as approved by engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cment mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cment slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 12 providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete. size of tile 600x600mm 13 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge concealed work, including cutting chases and making good the walls etc.20 mm nominal outer dia pipes 14 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply, including all cpvc plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge concealed work, including cutting chases and making good the walls etc.100 mm nominal outer dia pipes 15 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china wash basin size 630x450 mm with a sigle 15 mm c.p.brass pillar taps 16 providing and fixing p.v.c. low level flushing cistern with manually controlled device (handle lever) conforming to is : 7231, with all fittings and fixtures complete. 10 litre capacity - white 17 fencing with r.c.c. post placed at required distance, embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post one side only, provided with horizontal lines and two diagonals of barbed wire weighing 9.38 kg per 100 metres (minimum), between the two posts fitted and fixed with g.i. staples on wooden plugs or g.i. binding wire tied to 6 mm bar nibs fixed while casting the post (cost of r.c.c. posts, struts, earth work and concrete to be paid for separately) :- payment to be made per metre cost of total length of barbed wire used. with g.i. barbed wire 18 supplying at site angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. 19 supply and fixing of 36 watt to 46 watt above 3300 leumin indoor recess mounting led square fitting for armstrong ceiling having powder coated die cast aluminium housing body with extended heat sink and diffuser of special polycarbonate meterial and driver set complete in all respect. cat-aaa 20 wiring for light/ power plug with 2x4 sq. mm frls pvc insulated copper conductor single core cable in surface/ recessed medium class pvc conduit alongwith 1 no. 4 sq. mm frls pvc insulated copper conductor single core cable for loop earthing as required. 21 wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm frls pvc insulated copper conductor single core cable in surface/recessed medium class pvc conduit, with modular switch, modular plate, suitable gi box and earthing the point with 1.5 sq.mm frls pvc insulated copper conductor single core cable etc. as required.