tender for systematization to cemetery at pangri. tq. dist. buldana.- 1 excavation for foundation in earth, soils of all types, sand, gravel, soft murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete. ( by mechanical means ) 2 excavation for foundation in hard murum including shoring and strutting, dewatering as necessary and disposing off excavated stuff as directed etc. complete.a) upto 1.50m lift normal rate 3 providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic microprocessor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (natural sand / crushed sand vsi grade finely washed etc) 4 providing and laying plain in situ / ready mix m-20 cement concrete of trap/ granite/ quartzite/ gneiss/ crushed stone metal mechanically mixed, placed in foundation and compacted by vibration including necessary bailing out water, curing curing concrete batch mix plant / pan mixer with fine agreegates of required specifications ( vsi sand finely washed etc ) (excluding dewatering by pump) for 14 days rcc grade.with concrete mixer 5 providing and laying in situ / ready mix m-20 plain cement concrete of trap /granite/quartzite/ gneiss metal for cast in citu piers, abutment, returns, wings etc. including provision of v shaped false joints to form suitable panels on the faces to approve design with compacting by vibrating and curing complete, including plywood/steel form work centering ( excluding dewatering by means of pump) and including bailling out water and curing finishing in cm 1:3 etc. complete. as directed by engineer in charge basic rate shall be increased for height above 5.00 m in followinh manners (a) height upto 5 m. (with concrete mixer)with fine agreegates of required specifications ( vsi sand finely washed etc ) 6 providing and laying weep holes of 100 mm diameter pvc pipes as per drawing for abutment returns, return walls etc. complete. 7 providing expansion joints with 25mm thick bituminous pad as per detailed drawings etc. complete. 8 providing, cutting, bending, hooking, tying and laying in position tmt fe 500 steel bars for reinforcement for all rcc works as per detailed drawings etc. complete. 9 providing and laying of filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2 of morth specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition as per drawing and technical specifications etc. complete. 10 back filling behind abutment, wing wall and return wall as per drawings and technical specifications etc. complete. (by granular material) 11 excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. 12 conveying materials obtained from road cutting including all lifts, laying in layers of 20cm. to 30cm. breaking clods, dressing to the required lines, curves, grades and section, watering and compacting to not less than 97% of standard proctor density for a lead of 300m. to 500m. inclusive, from the site of excavation to the site of deposition as directed. 13 providing and fixing board displaying information, such as name of work, tender cost, name of contractor, work completion and liability period etc, having rectangular shape of 1.20m x 0.90m size made out 18 gauge (1.25mm) thick mild steel sheet painted with one coat of zinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on m.s.angle of size 35 x 35 x 3 mm frame with properly cross braced m.s. angles of size 35mmx35mmx3mm duly painted including two m.s. angle iron posts of size 65 mm x 65 mm x 6 mm, 3.65 m long painted with alternate black and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x 75 cm including, excavation, refilling, transportation, and labour etc complete. spec. no. as directed by engineer in charge 14 royalty charges for sand 15 royalty charges for metal and murum 16 fineness modulus,silt & clay content 17 compressive strength please enable macros to view boq information