supply of angle iron pole in bufferzone area angel iron pole as per attachemtn , discription of work , angle iron pole (bend type) 65x65x5 mm approx wt.4.9kg per mtr. polelenth 10 feet and lenth of bend portion shall be 18 for bend type of poles, and poles. the angle of bend shall be 45 deg.and identical in all pieces. the poles shall be split 12 from bottom. in the poles holes of 10mm dia shall be drilled the location of holes shall be measured from the top alonf the length of poles. hole of 10mm dia at every 9 distance from each other on the bendedporction of the pole,and hole of 10 mm dia at every 18 inchs distance from each other on the straight portion of the pole. the pole shall be painted with two coats of red oxide paint..size of pole refer to tender document condition