tender for repair and other miscellaneous work of non-residential building under division - dismantling corrugated iron roofs walls or partitions including perlins batterns and vertical supports and including stacking or dismentled materials as directed by the engineer in charge within a distance of 60 mtr. as per sor item no-701 2 excavation in foundations in ordinary soil (loam clay or sand) including lift upto 1.5 m.(5 fts.) and lead upto 30m.(100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the engineer-incharges upto a distance of 30 m.(100 fts.) from the foundation trenches. 3 supplying and filling in plinth with sand under floors, including watering ramming, consolidatingnand dressing complete, drs item no. 2.27 4 providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering 1:4:8 (1 cement : 4 coarse sand (zoneiii) derived from natural sources : 8 graded stone aggregate 40mm nominal size derived from natural sources) dsr item no. 4.1.8 5 brick work with common burnt clay f.p.s.(non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:4 (1cement : 4 coarse sand) dsr item no.- 6.1.1 6 construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. 7 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the worksbut inr.c.c.raft foundation and footingwithapproved stoneballast. (using1:1.5:3mix concrete) 8 r.c.c. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 bwg binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works but for slabs (using 1:1.5:3 mix concrete). 9 mild steel or iron in plain work such as reinforced concrete or reinforced, brick work(whennot includedin anover all rates )wroughttorequired shape as necessary including bending for proper completion of thework andincluding supply of steel itswastage bendhooks andauthorisedover lappingshallbe measured upto floor two level. 10 providing and applying white cement based putty of average thickness 1mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete. as per dsr no-13.80 11 painting with silicon and acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces. as per dsr no-13.51.2 12 providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: white vitreous china flat back wash basin size 550x 400 mm with single 15 mm c.p. brass pillar tap. as per dsr no-17.7.4 13 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of engineer in charge.15mm dia nominal outer dia pipes as per dsr no-18.8.1 14 providing and fixing chlorinated polyvinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply including all cpvc plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.this includes jointing of pipes & fittings with one step cpvc solvent cement and testing of joints complete as per direction of engineer in charge.25mm dia nominal outer dia pipes as per dsr no-18.7.3 15 providing and fixing 1st quality ceramic glazed floor tiles conforming to is : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer-in-charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarsesand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete 16 providing and fixing stainless steel (grade 304) railing made of hollow tubes, channels, plates etc including welding grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of engineer in charge (for payment purpose only weight of stainless steel members shall be considered including fixing accessories such as nuts, bolts, fasteners etc.) as per dsr 10.28 (drawing and design as per direction of e/i) 17 brick in1:4 cement and coarse sand mortar in superstructure for wall thickness 12 cms & below brick work. 18 12 mm cement plaster of mix 1:4: (1cement :4 fine sand) dsr item no. 13.1.1 19 providing and fixing white vitreous china pedestal type water closet (european type w.c. pan) with seat and lid, 10 litre low level while p.v.c. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to is : 7231 with all fittings and fixtures comple including cutting and making good the walls and floors wherever required w.c. pan with isi marked while solid plastic seat and lid. as per dsr item no-17.2.1 20 providing and fixing isi marked flush door shutters conforming to is : 2202 (part i) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including isi marked stainless steel butt hinges with necessary screws. single leaf. 21 providing and laying of rubble moulded zig zag interlocking concrete block pavements having thickness 80mm as per drawings and technical specification clause 15.04