tender for road safety work on daurala sardhana road from village milk to aterna via kulanjan odr - providing and laying road marking as per irc-35 1997 using thermoplastic (hot) application colour white/yellow by indigenous manually propelled road marking machine with single coat of 2.5mm thick as directed by engineer-in-charge including cost of conveyance all in gradients such as binders, glass beads, titanium-di-oxides, calcium. carbonate pigments as per mort&h specification of clause-803. 4.1.2 for the prepration of thermoplastic requirement for glass beads shall be table no. 803 4.1.3 of mort&h specification including cost of all materials, labour, t&p and hire charges etc. required for proper completion of work at site. as per sor chap. 27 2 providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per irc:35. the finished surface to be level, uniform a (repeated bar) as per sor si. no. 10 3 retro-reflectorised traffic sign as per irc 67-2012providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc 67:2012 made of high intensity grade sheeting vide clause 801.3, fried over aluminum sheeting type-iv 1.5 mm thick supported on a mild steel angle iron post 75mm x 75 mm x6 mm firmly fixed to the ground by means of properly designed foundation with m 15 grade cement concrete 45 cm x 45 cm x 60 cm below ground level as per approved drawing. the retro-reflective sheeting shall be tested for 3 year outdoor weathering test in indian conditions as per irc 67: 2012 & proof of the same in form of government report shall be uploaded with quoting tender. as per sor chap. 27 (new item 6)