supply of laip a type y shaped of 75mm x 75mm x 6mm dimensions notch cut and holes 4.215 mtr long minimum weight 28.662kg with tolerance as per specification and drawing attached. make tata rinl sail jindal , laip b type 65mm x 65mm x 6mm dimension notch cut and holes 2.55 mtr long minimum weight 14.79kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , laip c type of 65mm x 65mm x 6mm dimension notch cut and holes 2.25 mtr long minimum weight 13.05kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , laip d type of 65mm x 65mm x 6mm dimensions notch cut and holes 1.35 mtr long minimum weigh 7.83kgs with tolerance as per specification and drawing attached make tata rinl sail jindal , ms pole 6 mtr height medium grade 65mm nominal bore with 76.10mm outer dia including 1.5 rm long angle iron of size 40x40x5mm thick make tata rinl sail jindal , mounting arms fabricated from ms medium class pipe 40mm to 50mm dia and 1 mtr to 1.5 mtr long as per specification and drawing attached. , gi barbed wire hot rolled of 2.5mm dia line wire and 2 mm dia wire for barbs weight 120 gm per mtr with tolerance all as per specification and drawing attached. , a1 high security weld mesh panels of size 2600mm x 800mm of weight 20.52 kg all as per specification and drawing attached. , laip strut picket of 60mm x 60mm x 6mm 2.4 mtr long minimum weight 14 kg with tolerance all as per specification and drawing attached. , a7 straining y arm for supporting top ptcc. material ms l angle 50mm x 50mm x 5mm. 510mm 1 arm length. , a6 truss support post with rain end cap type circular hollow section. dimension 76mm dia all as per specification and drawing attached. , cement of 43 grade opc in sealed bags each weighing 50 kg all as per specification attached. make ambuja acc birla jk lakshmi ultratech , fine aggregate sand conforming to is 383 1970 , aggregate 20mm graded conforming to is 383 1970