tender for insulation works of main plant piping, ducting and equipments at rrs unit-5 and 6.; 1 removal of insulation material (hot/cold/close cell nitrile rubber/any type) with or without g.i/ aluminum cladding/ cemented cladding.orremoval of only g.i/ aluminum cladding/cemented cladding from pipelines/ equipment. 2 installation of thermal insulation (earlier removed/new) with earlier removed g.i/ aluminum cladding. or installation of earlier removed g.i/ aluminum cladding from same location. or installation of closed cell nitrile rubber sheet insulation (earlier removed/new) without gi/aluminum cladding. 3 fabrication and installation of new aluminum cladding. 4 installation of insulation pads on hot pipelines/ equiments without g.i/ aluminum cladding. 5 installation of cold insulating material (puf/ thermocol) with earlier removed aluminum/ gi cladding. 6 supply of reusable thermal insulation pads of size: length 7.0 to 8.0. meter, width 60-70 cm, thickness 25.0- 30.0 mm as per attached specifications in scope of work. 7 supply of sealing tape aluminium foil laminated to glass cloth with one side adhesive; size: length 20-21 meter, width 50-52 mm as per attached specifications in scope of work. 8 supply of sealing tape aluminium foil laminated to glass cloth with one side adhesive; size: length 20-21 meter, width 100-104 mm as per attached specifications in scope of work. 9 supply of cprx compound (rubber based bituminous adhesive) in 20 kg/ liter drum for use in cold insulation work. 10 supply of synthetic rubber adhesive fevicol sr-998 packed in 1.0 liter/ kg pack. 11 supply of slabs of size:1.0 m x 0.5 m x 50.0 mm thickness , material: rigid preformed cellular urethane (pur1) foam (puf) thermal insulation material as per is:12436 of density 30 to 38 kg/m³. 12 supply of slabs of size:1.0 m x 0.5 m x 25.0 mm thickness, material: rigid preformed cellular urethane (pur1) foam (puf) thermal insulation material as per is:12436 of density 30 to 38 kg/m³. 13 supply of thermal insulation closed cell nitrile rubber insulation (density 40-60 kg/cm³) with class o type having thickness: 25 mm thickness as per given specifications mentioned in scope of work. 14 supply of thermal insulation closed cell nitrile rubber insulation (density 40-60 kg/cm³) with class o type having thickness: 13 mm thickness as per given specifications mentioned in scope of work.