bids are invited for commissioner of customs adjudication - existing partition dismantling carefully demolishing the plywood panels frames taking the debris filling up in sacks and throwing out the debris out of site. , commissioner of customs - providingand fixing wall cladding work-wall paneling12 mm thick bwr plyto be applied with required frame structure design along with proper liningand labelling.all complete in laminate finish. coating of paint finish to be applied wherever required etc. , renovation of cabin - vitrified flooring workproviding and laying floor tiles with water absorptions less than 0.08percent and confirming to is 15622 in required design and pattern as per drawing in flooring over 20mm thick cement mortar 1is to 4 1 cement4 coarse sand bedding floated with neat cement slurry filling the joints with matching color pigment mixed with white cement laid to perfect line and level and pattern. , adjudication second floor - pdg and installation of customised above the wall cladding partition single skin. p and f of 81 mmthick full ht. wooden partition of varying lengthsshapesbends curvesin hallcabin area constructed out of 2 no x 19 mm hardwood frame work grid at inner supports and 3 no x 19 mm hardwood framework at all exterior sides door jambsin 2feet or lesser spacing screwed firmly to the rcc slabbeamfloor wall other partition or furniture unit etc. with necessary slots for passage of electrical conduits cables and covered with 8mm thick commercial plywood mr grade is 303 finished with 0.8 mm thick laminatewith 12 mm toughened clear glass with acid washfilm in part areasin place by half inch btc lipping in melamine polish from inner sideincluding fixing and sealing of wooden partition with all complete as per site requirement. , commissioner cabin - pdg and fixing of electrical power and light point 5 to 15 amp circuit of 2x2.5sqmm including modular switches socket internal box with face plate 1.5 sqmm wire green earthing wire in the pvc condui