tender for milling the existing bituminous surface 50 to 70mm depth removal of the black topped (bt) surface to 50 to 70mm depth using milling machine, including conveying the milled waste materials away from the worksite to an average distance including hire and running charges for the machine, conveyance charges, unloading at unobjectionable place, cleaning the milled surface as to avoid slippery including all other incidental charges etc. complete as per the direction of the departmental officers. (morth no. 111, 112, 202) , road a , tack coat over existing bituminous surface providing and laying tack coat over existing bituminous surface using 2 kg of bitumen emulsion (rs1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as perclause 503 of morth rev-5 - over bituminous surfaces. (morth no. 111, 112, 501, 503, 900) , road a , bc 40mm thick (grade-ii) using vg30 bitumen providing and laying bituminous concrete to 40mm thick using 0.13 cum of 19.00- 9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30kgs of vg30 bitumen for premixing per 10sqm including cost and conveyance of all materials to cmp site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne vibratory roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t cmp with bitumen boiler, tipper trucks, paver finisher, vibratory roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using cmp as per clause 507 o