tender for running contract for hon,ble sansad nidhi/vidhayak nidhi and other deposit works under edd-bilsi, budaun (semi turnkey). - the work of safe carriage of the following material from nawada store center to work site under the jurisdiction of edd-bilsi, budaun. approx. distance upto 50 km. including safe loading and unloading. 2 pcc pole 8.5 meter long. 3 stp 11 mtr long 4 line material i.e., cross arm/ conductor/ pin insulater/stay/earthing rod/disc fitting/disc insulators/11 kv xlpe cable etc/distribution box etc. 5 11/0.4 kv 3 phase 25 kva t/f 6 11/0.4 kv 3 phase 63 kva t/f 7 11/0.4 kv 3 phase 100 kva t/f 8 11 kv pilfer proof metering cubical and ct pt unit 9 erection of new pcc single/double pole in h.t/l.t lines including fitting of all accessories as per resspo norms. 10 pcc pole 8.5 mtr long single pole 11 pcc pole 8.5 mtr long double pole 12 st pole 11 mtr long single pole. 13 st pole 11 mtr long double pole. 14 grouting with 1:4:8 mixture in size (450x450x1500mm.) including cost of cement/cc & sand required as per resspo norms. 15 pcc pole 8.5 mtr long single pole 16 pcc pole 8.5 mtr long double pole 17 st pole 11 mtr long single pole. 18 st pole 11 mtr long double pole. 19 the work of driving the earthing electrode and making connections with 6 s.w.g. gi wire as per resspo norms. 20 digging of earth upto 2.5 mts., providing 2.5 mtr. long pipe with complete material and complete processing of chemical earthing, body/netural point of transformers. (all material will be provided by the contractor). 21 laying, stringing & sagging of following conductor complete in all respect. 22 acsr weasal conductor 23 acsr dog conductor 24 3 phase arial bunched conductor 25 1 phase arial bunched conductor 26 11 kv xlpe overhead 27 after mounting of ct pt unit on double pole, laying of 50 mtr 11 kv 3cx70 sq mm cable in single circuit on river sand form double pole to meetering room complete in all respect. alongwith filling of 04 nos cable jointing kits. 28 under groundlaying of following cable in single circuit by drill method to double pole situated at both sides of nh/sh/railway crossing complete in all respect. alongwith filling of 04 nos cable jointing kits. 29 11 kv xlpe cable size 3x70 sqmm 30 11 kv xlpe cable size 3x120 sqmm 31 making of 11 kv cable jointing kit 32 the work of digging of pits, erection of stay clamp, insulator etc. 33 grouting of stays, 1:4:8 cc ratio (600x600x300mm.) as per respo norms. 34 installation of 11 kv pilfer proof metering cubicle in metering room complete in all respect 35 mounting of following capacity transformers as per norms complete in all respect - 36 25 kva t/f 37 63 kva t/f 38 100 kva t/f 39 fixing of distribution box complete in all respect 40 fixing of denger board complete in all respect 41 guarding at road crossing complete in all respect 42 cutting of tree branch commingnear line 43 dismantling and removing of following 11/lt lines and poles as per norms complete in all respect. 44 lt ab cable 45 stp pole dismentling 46 acsr weasal conductor 47 safe back carriage of scrap (if any) from work site to nawada store budaunapprox distance upto 50 km including safe loading & unloading. 48 a.b. cable scrap 49 iron scrap 50 stp pole scrap 51 acsr weasel conductor scrap 52 the following decentralized material shall be provided by the contractor for execution of work as per respo norms (the material shall be purchased from approved vendor of discom). 53 f-clamp 54 cross am holding clamp with nut &bolts 55 stone pad 56 garding angle 57 garding angle clamp with nut & bolt 58 dropper channel 59 top and dropper channel clamp for stp/pcc 60 bolt nut &wahser 61 lt clamp 62 stay clamp 63 suspension clamp for xlpe overhead 64 danger board