rate contract for india mark-ii handpump sets, riser pipes and accessories , 32mm nb g.i.pipe (medium class) both end threaded having one socket 3 meters length.(is : 1239 ) , connecting rod( brite bar) suitable for india mark ii h.p. , hexagonal bolt m12x 1.75 px40l with two nuts & washer ( body nut bolt) , handle( bar)only {having keyway type slot to remove bearing} , handle assy with bearing 2 nos spacer and axle with chain & nut bolt , chain with coupling and nut& bolt , bearing6204(z) , handle axle with washer and 2 nuts , bucket washer (n.r) , sealing ring , head with cover & third plate , water tank , cylinder body with brass liner only , cylinder assy complete , upper valve assly 2 piece (upper valve complet) , lower valve compt. (cvg + rsr+rs) , reducer cap , rubber seat for upper valve , rubber seat for lower valve , plunger yoke body assy(u.v. asse) , lower valve assly. , follower , plunger yoke body only. , spacer ( cylinder part ) , check valve seat , telescopic stand assembly(pedestal ) , plunger rod s.s. , connecting rod socket(rod coupler) , hexagonal bolt m10x 1.5 px40l with nylock nut (nut bolt for chain) , g.i pipe socket b class( h.d.) 32mm dia , hexagonal bolt m12x 1.75 px20l (head bolt ) , head (front ) cover only , third plate , handle spacer , pump bucket(v. t. ) , compt.handpumpassy.(india mark ii ) with 32mm n.b.,g.i.pipes (medium class ) both end threaded having one socket 3 meters length -10 nos.&connecting rod (brite bar )- 10 nos. (is-15500 ) , pipe wrench900 mm (36 inch) size make- everest/taparia , pipe wrench600 mm (24 inch) sizemake- everest/taparia , pipe wrench) 450 mm (18 inch) sizemake- everest/taparia , pipe wrench 300 mm (12 inch) sizemake- everest/taparia , pipe liffing spanner for 32 mm n.b. pipe , self locking automatic clamp for 32 mm pipe , screw type heavy duty mechanical clamp for 32 mm n.b. pipe , crank spanner (17x19) , screw type heavy duty mechanical clamp for 65 mm n.b. pipe , pipe liffing spanner for 65 mm n.b. pipe , 1) screw type heavy duty mechanical clamp suitablefor 32 mm n.b.pipe-1 no. 2) pipe lifting spanner for 32 mm n.b.pipe -3 nos. 3) water tank lifter for 32 mm n.b. pipe -1 no. 4) connecting rod clamp-1 no. 5) coupler spanner -1no. 6) connecting rod lifter 1no. 7) handle axle punch -1no. 8) crank spanner (17x19) 2no. 9) chain coupler supporting tool -1no. 10) bearing pressing tool -1no. 11) tool box (to accmodate all above items except