tender for removal of old aluminium windows/doors and replacement with upvc in h-1 hall of residence no.-5, kalidas marg, renovation of chairs and tables in waiting area of ​​h-2 hall and other necessary various repair works - dismantlingdoors,windowsandclerestorywindows(steelorwood) shutterincludingchowkhats,architrave,holdfastsetc.completeand stacking within 50 metres lead : of area 3 sq. metres and below dsr no 15.12.1, 2 fixed window / ventilator without mullion / transom_ using r3 series with frame (55 mm & above) x (45 mm & above). (height upto 2.5 metre) dsr no 9.147.c1.3 3 three tack three panels sliding window with two glazed & one wire mesh panels with aluminium channel for roller track, wool pile, nylon rollers with ss 304 body. using r23 series with frame (98mm & above) x(40mm & above)& both glazed and fly screen sadh (30mm & above) x (55mm & above) with zinc aloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (height upto 1.8m) dsr no. 9.147.a4.2, 4 providing and fixing new chair cushion with mat forming plywood chair cushion (with high density) three inches new cover etc. including cost of all material labour & t&p etc. complete. 5 polishing in high gloss/matt finish melamine clear polish on wood work in required colour/wooden shade texture with following process in the sequence as detailed below.1-the surface to be polished in rubbed with sand paper 80/120 no. and then with sand paper of 160/180 nos. 2-applying two coats of sealer with spray gun and allowing sufficient drying time for lst coat and 2nd coat is allowed to dry for 8 to 12 hrs.3-on drying of sealer coat, wet rubbing with emery cloth of finer grading with ample water to remove excess sealer layer and make the surface futher smooth after this wet rubbing , then surface is applied with special grade melamine fillers to fill all the small and big holes/grooves etc. filler coat to be allowed to dry for 4 to 6 hrs on which again a light wet rubbing is done this surface in furface allowed to dry for 12 hrs.4- on this, 1st coat of melamine polish is applied with spray gun using melamine clearpolish and melamine thinner in required proportion. this 1st coat is allowed to dry for 24 hrs than this dry surface is again fine wet rubbed smooth, which is futher allowed to dry for 12 hrs. the final melamine polish ia applied with compressor pressure spray gun using melamine clear polish and melamine thinner mixed in required proportion complete as per direction of engineer - in- charge. (final coat to be done in 1 or 2 layers without gap of time.) dsr.n0-13.116), 6 providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement andmakingnecessaryholesetc.forfixingrequireddoorfittings,all complete as per direction of engineer-in-charge (door handle, lock and stopper etc.to be paid separately). dsr no. 21.18,