supply of periprosthetic titanium locking plate should be a long curved 4.5 mm broad lcp plates with 6 locking screws of 5mm size (available with 12 to 26 holes screws with blunt tips two in numbers to allow unicortical fixation of fractures when an intramedullary implant is presentaccompany with two cortical screws and arthroplasty periprosthetic fracture control cable including one control cable and one cable crip)periprosthetic titanium locking plate should be a long curved 4.5 mm broad lcp plates with 6 locking screws of 5mm size (available with 12 to 26 holes screws with blunt tips two in numbers to allow unicortical fixation of fractures when an intramedullary implant is presentaccompany with two cortical screws and arthroplasty periprosthetic fracture control cable including one control cable and one cable crip),srphc401405-periprosthetic titanium locking plate should be a long curved 4.5 mm broad lcp plates with 6 l ocking screws of 5mm size .should be precontoured to mimic the anteroposterior curvature and suture hole in the pla te to allow temporary fixation. the tip of the plate should be tapered rounded to facilitate minimally invasive surgical procedures. should be available with 12 to 26 holes screws with blunt tips two in numbers to allow unicortical fixati on of fractures when an intramedullary implant is presentaccompany with two cortical screws and arthroplasty peri prosthetic fracture control cable including one control cable and one cable crip. each set along with complete set o f instrumentation. it must be supplied as and when required basis. the screw system merges locking screw technology with conventional plating technology. unit:set the item may be supplied with brand: johnson & johnson/marquardt/auxein/si gma or similar. [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]