tender for annual plan-kuzhimanna gp 2025-26,proj no:- 170/26 renovation works to athikalodi anganwadi-kuzhimanna gp-general civil work - renovation works 2 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 3 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal sizederived from natural sources) 4 50.10.2:steel work for purlin/single section with g i pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete 5 od331334/2025-2026:providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by engineer-in-charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per is: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by engineer-in-charge. the sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with epdm seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. details of cost for 216.14 sqm (external dimension of plinth) area of roof 20.2x10.70m=216.14sqm sheets used = 20nos x 10.70m x 1.06m = 226.84 sqm add 3% wastage = 6.81 total = 233.65sqm 6 od331333/2025-2026:providing and fixing 200mm wide,square cut pvc 4kgf/cm2 rain water gutter pipe with irorn bracketswith 25x 5mm size ms flat screws and washers etc. including making necessory connections with rain water pipes etc. complete. 7 od331335/2025-2026:providing and fixing pvc pipes including fixing the pipe with clamps/clips at 1.00 m spacing. this included jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 90 mm dia 4 kfg/cm2 - external work - exposed on wall 8 17.7.9:providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china surgeon type wash basin of size 660x460 mm with single 15 mm c p. brass pillar taps with elbow operated levers isi marked 9 50.18.7.4.2:providing and fixing pvc, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 32 mm dia 6 kgf/cm2 - internal work- exposed on wall 10 50.18.8.7.1:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work including cutting chases and making good the wall etc. 63 mm pipe 6 kgf/cm2