annual plan-pr.no.296/2024-25-maintenance of pakal veedu-ward no.1-general civil work-nayarambalam g.p--1 building maintenance 2 13.9.1:cement plaster 1:3 ( 1 cement : 3 coarse sand) finished with a floating coat of neat cement.12 mm cement plaster 3 od259975/2025-2026: supplying and fixing 0.5 hp mono block motor pump set with stand, hose and fittings. 4 od259977/2025-2026:engaging carpenter for wood works 5 od259976/2025-2026:providing and fixing steel bib cock of approved quality to is:8931 6 50.18.9.14.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 32 mm dia 6 kgf/cm2 - external work - exposed on wall 7 50.18.7.3.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 25 mm dia 10kgf/ cm2- internal work- exposed on wall 8 18.48:providing and placing on terrace (at all floor levels) polyethylene water storage tank :isi 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 9 50.18.9.17.1:providing and fixing pvc pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 63 mm dia 6 kgf/cm2 - external work - exposed on wall 10 21.1.1.1:providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate z sections and other sections of approved make conforming to is : 733 and is: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required epdm rubber/ neoprene gasket etc. aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminnium snap beading for glazing /paneling, c.p. brass/ stainless steel screws, all complete as per architectural drawings and the directions of engineer-in-charge.(glazing, paneling and dash fasteners to be paid for separately):for fixed portionanodised aluminium (anodised transparent or dyed to required shade according to is : 1868, minimum anodic coating of grade ac 15) 11 21.3.1:providing and fixing glazing in aluminium door, window, ventilator shutters