tender for provision of hydrant , enhanced fencing at the sports ground at aiims bilaspur, hp.; 1 earth work in excavation by mechanical means (hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 2 all kinds of soil 3 providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 4 1:2:4 (1 cement : 2 coarse sand(zone-iii) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). 5 centering and shuttering including strutting, propping etc. and removal of form work for : 6 foundations, footings, bases for columns. 7 steel reinforcement for r.c.c. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. 8 thermo-mechanically treated bars of grade fe-500d or more. 9 demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in - charge. 10 nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 11 reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor 12 steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. 13 hot finished welded type tubes. 14 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: 15 two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. 16 providing and fixing g.i. pipes complete with g.i. fittings including trenching and refilling etc. : external work 17 15 mm dia. nominal bore 18 making connection of g.i. distribution branch with g.i. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 19 25 to 40 mm nominal bore 20 providing and fixing g.i. union in g.i. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 21 15 mm nominal bore 22 hiring of excavatorhydraulic excavator (3d) with driver and fuel for levelling groundas per direction of engineer in charge. 23 providing and fixing g.i. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of engineer-in-charge. 24 made of g.i. wire of dia 4 mm 25 fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with g.i. staples, turn buckles etc. complete. (cost of posts, struts, earth work and concrete work to be paid for separately). payment to be made per metre cost of total length of barbed wire used. 26 with g.i. barbed wire