tender for additional / alternator of platform in front of kv school at afs amla.; 1 excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft soil complete all as specified and directed. 2 m&l for hardcore of guage n.exc 63mm deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface complete all as specified and directed. 3 m&l for pcc 1:4:8 type d-2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed. 4 m&l for 100 mm thick; plain cement concrete (pcc) 1:2:4 type b-2 (using 40mm graded stone aggregate), as in top layer of the floor, pavings etc., including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed. 5 m&l for forming construction joint 30mm deep x 10mm wide filled with sealing compound grade a complete all as specified and directed. 6 m&l for brick work with fly ash brick75 kg/cmsq compressive strength. modularsize , is straight or curved on plan exc. 6 metermean radius built in cement mortar 1:6 complete all as specified and directed. 7 m&l for plain cement concrete b-0 type (1:2:4) (using 12.5 mm graded crushed stone aggregate) as in copings, bed plates, benching and the like finished fair & even, including necessary form work complete all as specified and directed. 8 m&l for pcc 1:4:8 type d2 (using 40mm graded stone aggregate) as in sub base 75mm thick, finished fair & even complete all as specified and directed. 9 m&l for rendering 15 mm thickon fair faces of brick or stone surfaces of walls in cement mortar 1:6 finished even and smooth without using extra cement with and including sagol finish complete all as specified and directed. 10 m & lfor preparation of new plastered surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. 11 m&l for 75 mm thick; pcc 1:3:6 type c2 (using 40mm graded stone aggregate), as in plinth protection, including finishing the surface by spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and making saucer drain complete all as specified and directed. 12 returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed. 13 removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m complete all as specified and directed.