tender for annual plan-manalur gp 2024-25project no: 311/25 basic facilities to pulari anganavadi cum crush no88 -ulari anganavadi cum crush no88-general civil work- extension work & maintanance 2 15.7.4:demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of engineer-in-charge.in cement mortar 3 50.6.1.5:solid block masonry using pre cast solid blocks ( factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for super structure up to floor two level thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand) etc complete 4 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 5 13.46.1:finishing walls with acrylic smooth exterior paint of required shade:new work (two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) 6 14.46:removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. 7 14.53.1:wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:one or more coats on old work 8 11.36:providing and fixing i st quality ceramic glazed wall tiles conforming to is : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by engineer -in-charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 9 11.37:providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to is : 15622, of approved make, in colours such as white, ivory, grey, fume red brown, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc., complete. 10 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil 11 od546544/2024-2025: dry rubble masonry- dry rubble without concrete levelling coursemasonry with good quality blasted rubbleincluding packing to compactness to lines and levels, cost and conveyance of all materials, labour charges etc, complete as per direction of departmental officers at site 12 5.1.3:providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - all work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 13 5.9.5:centering and shuttering including strutting, etc. and removal of form for:lintels, beams, plinth beams, girders bressumers and cantilevers 14 5.22.6:steel reinforcement for r.c.c work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelthermo - mechanically treated bars of grade fe-500d or more 15 5.3:reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (zone iii) : 3 graded stone aggregate 20 mm nominal size). 16 5.9.3:centering and shuttering including strutting, etc. and removal of form for:suspended floors, roofs, landings, balconies and access platform 17 10.16.1:steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.hot finished welded type tubes 18 od547876/2024-2025:providing and fixing upvc rain water collection gutters (150*100mm) of approved make including cost of necessary fitting clamp, jointing with silicon sealent, labour for fixing , scaffolding charge etc complete. 19 od5191/2025-2026:roofing with g.i hard colouur powder coated traffod sheets 0.35 mm thick or nearest available thickness with overlaps of 150 mm at ends and gi hook or crank c.i. bolts and nuts including plain washers and bitumen washers etc complete 20 od547878/2024-2025:supplying and fixing 20mm thick ready made pvc door (80*200cm) with frame 50*42 mm including conveyance,cost of fitting , labour for fixing etc. 21 od5189/2025-2026:providing and fixing white vitreous china pedestal type baby water closet (european type w.c. pan) with seat and lid, 5 litre low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to is : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required 22 50.18.7.4.2:providing and fixing pvc, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 32 mm dia 6 kgf/cm2 - internal work- exposed on wall 23 50.18.7.6.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 50 mm dia 6 kgf/cm2 - internal work- exposed on wall 24 50.18.7.1.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge 15 mm dia 10kgf/cm2 - internal work - exposed on wall 25 50.18.8.9.2:providing and fixing pvc pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes with one step pvc solvent cement and testing of joints complete as per direction of engineer-in-charge. concealed work, including cutting chases and making good the wall etc. 110 mm pipe 4 kgf/cm2 26 17.32.2:providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :rectangular shape 453x357 mm 27 17.7.7:providing and fixing wash basin with c.i. brackets, 15 mm c.p. brass pillar taps, 32 mm c.p. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:white vitreous china flat back wash basin size 450x300 mm with single 15 mm c.p. brass pillar tap 28 17.9.1:providing and fixing kitchen sink with c. i brackets, c.p. brass chain with rubber plug, 40 mm c.p brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:white glazed fire clay kitchen sink of size 600x450x250 mm 29 50.17.1.1:supplying and fixing stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 30 50.17.1.2:supplying and fixing cp towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site engineer-in-charge. 31 50.17.1.4:supplying and fixing cp health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. 32 10.1:structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 33 od547877/2024-2025:providing and laying 60 mm thick factory made cement concrete interlocking paver block of m-30 grade made by block making machinewith strong vibratory compaction of approved size, desigh & shape , laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm aggregate , filling the joints with fine sand etc all complete as per the direction of engineer-in- charge. modified data 16.68