tender for general-kottur gp 2025-26 karuvally colony road retarring-project no : 110/26-general civil work - road 2 3.15.1:compacting original ground
(i) compacting original ground supporting embankment
loosening, levelling and compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at omc and then compacted by rolling so as to achieve minimum dry density as given in tables 300.1 and 300.2 for embankment construction as per technical specification clause 301.4.1. 3 4.1.a.1:granular sub-base with well graded material (table 400.1)
(a) by mix in place method
construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401.
(i) for grading i material 4 4.9:wet mix macadam
providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406.
by mechanical means with 1 km lead 5 75.5.1.1pb:prime coat - low porosity - with packed bitumen rates
providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per technical specification clause 502 6 75.5.2.3pb:tack coat - with packed bitumen rates
providing and applying tack coat with bitumen emulsion (rs-1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specification clause 503. 7 75.5.11.1.a.2pb:mix seal surfacing - manual means - type a - bitumen s-65 - packed bitumen rates
providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 11.2 mm to 0.9 mm (type-a) or 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509
by manual means
type a
(ii) bitumen (s-65) 8 od267976/2025-2026:15.2.2. demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of engineer - in-charge. nominal concrete 1:4:8 leaner mix ( including equivalent design mix)