annual plan-ponnani municipality -project no.286/2025-modernization of nilayora tourist destination-general civil work-- 1 renovation works 2 50.6.1.4:solid block masonry using pre cast solid blocks (factory made) of size 30x20x20cm or nearest available size confirming to is 2185 part i of 1979 for foundation and plinth with thickness 20cm and above in: cm 1:6 ( 1 cement : 6 coarse sand ) etc complete 3 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) 4 11.41.2:providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to is : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.size of tile 600 x 600 mm. 5 od268824/2025-2026:white cement washing on to the exposed surfaces of cement plastering 6 13.48.1:finishing with deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm 7 od268887/2025-2026:cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size ) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete-excluding side shuttering (modified from dar 16.42) 8 8.2.3.2:granite stone slab of all colour and texture except black, cherry / ruby redarea of slab over 0.50 sqm 9 8.3.1:providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by engineer -in-charge.marble work 10 od269072/2025-2026:providing and laying 80 mm thick factory made cement concrete interlocking paver block of m - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of engineer-in-charge.