tender for construction of hard standing in mt garage asc bn (mt) at mil stn haldawani; 1 surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in hard/ dense soil complete all as specified and direceted. 2 removing excavated material/soil n. exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed 3 m&l for moorum/red bajri filling in floors or pavings, laid in layers n. exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed. 4 m&l for broken stone or boulders hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. 5 m&l for rolling and consolidating formation surfaces in cutting using power roller exc. 8 tonnes and n. exc. 12 tonnes complete all as specified and directed. 6 m & l for 75mm thick plain cement concrete type d-2 1:4:8 (using 40mm graded stone agg) as in path/paving/ hard standing etc. complete all as specified & directed. 7 m&l for cement concrete work in pavement/ hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less complete all as specified & directed. 8 supply only synthetic non circular/ rectangular fibres 12mm long with circumcircle dia 30 to 35 micron design for melting point of 240 to 360 degree centigrade and having specific gravity of 1.34 to 1.40 at 1 kg per cum of cement concrete complete all as directed by engineer in charge. 9 m & l for finishing surface of concrete roads, pavements, by brooming complete all as specified and as directed. 10 m & l for forming contraction (dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade a complete all as specified and as directed. 11 m & l forming construction joint 30mm deep x 10mm wide filledwith sealing compound grade a complete all as specified and as directed. 12 m & l for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, grade ‘a’ for 150mm thick conc. slab complete all as specified and as directed 13 m & l for providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges type b0 1:2:4 using 12.5mm graded stone agg. complete all as specified and as directed