tender for asana chakut road. (length-12.500 km) - providing, laying, spreading and compacting stone aggregateof specifie size to water boundmacadam (g-3) specification including spreading in uniform thickness hand packingrolling with smooth wheel roller 80-100 knin stages to proper grade and camber applying and brooming stone dust to fill-up the interstices of coarse aggregate, watering and compacting to the required densityas per technical specification clause 405. (including all taxes, labour cess , royalty etc. but excluding gst ) for proper completion of work. 2 providing and applying tack coat with bitumen vg-10 using bitumen pressure distributor at the rate of 0.30kg per sqm on the prepared bituminous surface cleaned with mechanical broomas per technical specification clause 503. (including cost of bitumen, all taxes, labour cess , royalty etc. but excluding gst )for proper completion of work. 3 providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregatesusing vg-10 grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 120 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades as per technical specification clause 510(including cost of bitumen, all taxes, labour cess , royalty etc. but excluding gst )for proper completion of work. 4 providing and laying of premix sand seal coat with hmp of appropriate capacity not less than 120 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable gradeas per technical specification clause 511 (including cost of bitumen, all taxes, labour cess , royalty etc. but excluding gst )for proper completion of work.