supply of procurement of inspection gaugesprocurement of inspection gauges,manufacture and supply of complete set of inspection gauges as per rdso drg no.t-6213 (p art) for 6400 mm o.r. fan shaped curved switch bg for 60 kg on psc sleepers to drg.no. rdso/t-4966 for use in depot. one set consists of : (a) end , manufacture and supply of complete set of inspection gauge as per rdso drg no.t-9002 (pa rt) for 6400 mm curved switch with zu-1-60 thick-web tongue rails for 1 in 8.5 turnout b.g. (1673mm) for 6 0 kg (uic)/60e1 on psc sleepers to drg. no. rdso/t- 6280 for use in depot. one set consists of : (a) end te mplate-y at actual toe gauge no.1, (b) head width checking gauge at point h 22 mm head thickness gau ge no.2, (c) head width checking gauge at point h 22 mm head thickness gauge no. 2a & 2b, (d) head wi dth checking gauge at point g 55 mm head thickness gauge no.3, (e) head width checking gauge at point g 55 mm head thickness gauge no. 3a & 3b (f) 13mm radius on gauge face gauge no.4. ] , manufacture and supply of complete set of inspection gauge as per rdso drg no.t-9004 (pa rt) for 1 in 16 turnout with 11200 mm zu-1-60 thick-web switch for 60 kg (uic) to drg. no. rdso/t-7076 fo r use in depot. one set consists of : (a) end , manufacture and supply of complete set of inspection gauges as per rdso drg no.t-4782 (p art) for 1 in 12 cms crossing b.g. for 60 kg. to drg. no. rdso/t- 4220 for use in depot. one set consists of : (a) bottom width gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flan ge way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depres sion gauge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge no.13, (i) wing rail gauge(at nose) gauge no.14. ] , manufacture and supply of inspection gauges as per rdso drg no.t-4989 (part) for 1 in 8.5 cms crossing b.g. for 60 kg .to drg. no. rdso/t- 4967 for use in depot. one set consists of : (a) bottom wi dth gauge (at sleeper location) gauge no.1, (b) flange way clearance gauge no. 2, (c) flange way clearance (at throat) gauge no. 3, (d) flange way clearance (41mm) gauge no.4, (e) nose depression ga uge no.5, (f) nose thickness gauge no.6, (g) end slope gauge no.7, (h) wing rail gauge(outside) gauge n o.13, (i) wing rail gauge(at nose) gauge no.14. ]