tender for repairing and resurfacing of service road of etawah branch from km. 94.000 to km. 96.000for the year 2025-26 - providing, laying, spreading and compacting stone aggregates of specific sized to water bound macadam (75 mm thick) specification including spreading in uniform thickness, hand packing, rolling with smooth wheel static roller 80-100 kn in stages to proper grade and camber, applying and brooming, crushable screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading iii as per technical specification clause 405. 2 providing and applying primer coat with bitumen emulsion (ms-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.85 kg/sqm using mechanical means as per technical specification clause 502. 3 providing and applying tackcoat with bitumen(rs-1) using bitumen distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared granular surfaces treated with primer & cleaned with hydraulic broom as per technical specififcation clause 503 4 20 mm thick open-graded premix carpet using bitiminous (penetration grade/modified bitumen) providing and laying of open graded premix carpet of 20mm thick composed of 13.20mm to 5.60 mm aggregates either using penetration bitumen or emulsion (bitumen vg-10)to required line, grade and leved to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 kn static roller capacity, finished to required level and grades to be followed by seal coat of either type a or type b or type c as pertechnical specification clause 508. 5 providing and laying seal coat sealing the voids onbituminious surface laid to the specified levels, grade and cross falls using type c as pertechnical specification clause 510.