tender for road marking work at lalganj-manjhanpur-mau road (sh 171) km. 41.650 to 51.360. - providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with m-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (stop) (90cm hight octagon). 2 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with m-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing(t junction and left/right turns)(90cm equilateral tringle with diffintation palte size (20cm x 60cm) 3 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with m-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (maximum speed limit).(60cm circular with diffintation palte size (20cm x 60cm) 4 providing and laying of hot applied thermoplastic compund 2.5 mm thick including reflectrosing glass beads @ 250 gms per sqm area. thickness of 2.5 mm is exclusive of surface applied glass beads as per irc: 35 the finished surface to be level. area of edge line of 10 cm. width along road both sides. 5 providin and erecting a w metal beam crash barrier comprising of 3 mm thick corrugated sheet metal beam rail. 70 cm above road/ ground level, fixed on ismc series channel vertical post 150x75x5 mm spaced 2m centre-to-centre 1.8 m high. 1.1 m below ground/road level. all steel parts and fitments to be galvanised by hot dip process. all fittings to conform to is:1367 and is:1364 metal beam rail to be fixed on the vertical post with a spacer of channel section150x75x5 mm 330 mm long complete as per clause 810. 6 thermoplastic marking of 300 mm wide and 15 mm height at 1000 mm apart (one set is of 6 strips) 15 mm height is acheved through six application of thermoplastic, applied at an interval not less than 1 hour after the previours layer gets solidified.alternatively. made of mastic asphalt or any equivalent material which would provide 15mm high.(reapeted bar) 7 supply, fixing and eraction of built up cantilever structure 6 m span comprising of one vertical posts of 6.00 m height made up 300 mm nb heavy class ms pipe as vertical mamber welded with 10 mm plate at topand 12 mm ms plate at bottom. the horizontal truss shall comprise of 50 mm dia heavy class ms pipe and 40 mm dia heavy ms pipe as bracinf & 10 mm ms plate at bottom for fixing og vertical post as per structure design & drawing with one of steel primer and two coats of synthetic anamel plant. the work includes construction of rcc foundations of size 90x90 m required depth as per site condition for built up structure including earthwork in excavation 100 mm thick lean concrete in 1:4:8 cement coarse sand and 40 mm gauge stone ballast. rcc withand 1:2:4 cement coarse sand and 20 mm stone grit including supply and fixing of 25 mm dia foundations bolts 600 mm long as per provosoin of structure disign including costs of reinforcement and shuttering. the lateral vertical clearence and complete. 8 providing and fixing of reflective signs boards comprising of costomized moduler pu epoxycoated ms iror angle frame withthick aluminium composite panel face to be fully covered with high intensity prismatic sheeting type iv as per irc-67-2010 retro reflevtive sheetingwith ms angle frame of 35x35x3 mm morth-801 9 providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per irc:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with m-15 grade cment conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing(t junction and left/right turns)(80mmx60mm rectangularwith diffintation palte size (20cm x 60cm)