bids are invited for lt motors installed for pusher car leveller 1 1600206840 motor induc 180 415 3 4 315lx f b3 s1 r motor induction power rating (kw):180 voltage rating ( v ):415 phase:3 pole:4 frame size:315lx insulation class/temperature class:f/b mounting:b3 duty cycle:s1 tb location from drive side (l/r/t):r frequency ( hz ):50 speed ( rpm ):1488 connection:delta ingress pro tection:ip55 enclosure/cooling:tefc/ic411 energy effi ciency class:ie2 special features:bidirectional, with roller bearing, amb. temp:50degc method of starting: dol applicable standards:ic 12615 no 1 2 1600158756 motor induc 55 415 3 6 280m h b3 s4 t motor induction power rating (kw):55 voltage rating( v ):415 phase:3 ph pole:6 pole frame size:280minsulat ion class/temperature class:h (temp. riselimited to c lass f) mounting:b3 duty cycle:s4 40%cdf tb locati on from drive side (l/r/t):topfrequency ( hz ):50 hz, +3% ,-6% current rating(ampere):95 speed ( rpm ):980 connection:deltaingress protection:ip55 enclosure/co oling:tefc/ic411 power factor:0.86 energy efficiency class:ie293.5% rotor type:squirrel cage bearings(de/ nde):6318-c3/6318-c3 antifriction additional informat ion:insulated bearing at nde,shaft: single endedcylin drical, motor gd sq. (kg-m²): 8.64, spaceheaters - wa tts/volts: space heater 60wx2 (250v ac),accessories: rod type btd (1/brg), 3 wire type rtdpt 100- 6 nos, v ibration intensity-as per is:12075;noise level as per is:12065, all tolerances shallbe as per relevant is standards. locked rotorwithstand time hot/cold in sec:15/30 method ofstarting:variable voltage / freque ncy starts perhour:150 starts/hr applicable standards :is: 1231,is:325, 1pss1 03-001, iec:60034 no 1 3 1600156945 motor induc 22 415 3 6 200l h b3 s4 t motor induction power rating (kw):22 voltage rating ( v ):415v, +- 10% phase:3 ph pole:6 pole frame size:2 00l insulation class/temperature class:h (temp. rise limited to class f) mounting:b3 duty cycle:s4 40% cd f tb location from drive side (l/r/t):top frequency( hz ):50hz, +3% ,-6% current rating (ampere):40a speed ( rpm ):975 connection:delta ingress protection:ip55 enclosure/cooling:tefc/ic411 power factor:0.84 energ y efficiency class:ie2 91.5% rotor type:squirrel cage bearings(de/nde):6312-2rs/6212-2rs antifrictionaddi tional information:shaft: single ended cylindrical,. all tolerances shall be as per relevant is standards. method of starting:variable voltage / frequency st arts per hour:150 starts/hr applicable standards:is : 1231, is: 12075, is: 12065, is:325, 1 total quantity : 6