tender for nrs medical college & hospital-day to day maintenance &repair for water supply underground main lines with riser line including headers, controling valves etc- 1 dismantling of flexible pavements and disposal of dismantled materials upto a lead of 100 m, stacking serviceable and unserviceable materials separately as per technical specifications clause 202 for rural roads of mord. 2 by manual means 3 bituminous courses 4 granular courses 5 earth work in excavation of foundation trenches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing, spreading or stacking the spoils within a lead of 75m.as directed. the item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. . 6 (a) depth of excavation not exceeding 1.500 mm. 7 single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints withlocal sand. 8 ordinary cement concrete(mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant is codes. 9 (a) pakur variety. 10 (b) filling in foundation or plinth by fine sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete . including the cost of supply of sand .(payment to be made on measurement of finished quantity). 11 supplying and laying polythene sheet (150gm / sq.m.) overdamp proof course or below flooring or roof terracing or infoundation or in foundation trenches. 12 supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg sq.cm. (for water lines only). 13 100 mm. 14 80 mm 15 50 mm 16 25 mm 17 supply of g.i. short piece of tata make (above 50 mm & upto 150 mm long). 18 50 mm. 19 40 mm 20 25 mm 21 80 mm 22 supply of galvanised iron socket with i.s.i. mark. 23 50 mm dia. 24 80 mm 25 40 mm 26 25 mm 27 supply of g.i. plain equal elbow of approved brand and make. 28 50 mm. 29 80 mm 30 40 mm 31 supply of long screw(150 mm long) of tata make with sockets(tata make) and jamnut. 32 25 mm. 33 50 mm. 34 40 mm 35 supply of g.i. plug. 36 50 mm. 37 80 mm 38 supply of g.i. pipes of tata make of different dia. including necessary sockets. 39 80 mm dia. 40 medium quality. 41 50 mm dia. 42 medium quality. 43 40 mm dia. 44 medium quality. 45 supplying, fitting and fixing pvc pipes of approved make of (medium duty) conforming to astmd-1785 and threaded to match with gi pi;es as per is:1239 (part-i) with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting piles, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required, jointing materials and two coats of painting with approved paint in any position above ground. (payment will be made on the centre line measurements of total pipe line including all specials. no separate payment will be made for accessories, specials. payment for painting will be made seperately). 46 for exposed work pvc pipes. 47 80 mm. 48 50 mm. 49 supplying, fitting and fixing c.i.holder bat clamp including cutting holes in wall etc. and mending good all damages in cement concrete with jhama chips(4:2:1) and cement plaster(6:1) to match and curing complete in all respect. 50 80 mm. 51 50 mm. 52 c.i. sluice valve with flanged ends drilled to as per i.s. 1358/62 and having all cast iron components as per i.s. 780/71 solid forged bronge inside screw spindle having ultimate tensile strength not less than 4.72 mt per sq. cm.spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conforming to i.s. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to antilockwise direction, fitted and fixed complete. 53 100 mm. 54 80 mm. 55 50 mm. 56 renewing spindle of hydrant. 57 (v) 50 mm . 58 (vi) 75 mm.