tender for general maintenance and painting work at house no. 3 located at vikramaditya marg - providing and fixing isi markedflush door shutters conforming to is : 2202 (part i) non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply veneening with vertical graints or cross brand and face veneers on both faces of shutters. 35 mm thick including isi marked stainless steel butt hinges with necessary screws.dar n0-9.21.1, 2 providing and fixingfly proof galvanized m.s. wire gauge to windows and clerestory window using wire gauge with average widht of aperture 1.4 mm both directions with wire of dia 0.63 mm all complete with second class teak wood beading 62x19 mm. dar no-9.51.1, 3 providing and fixing float glass panes 4.0 mm thick(weight not less than 10.00 kg/sqm), (dar-9.7.7.1) 4 providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with isi, is : 3564, embossed on the body, door weight upto 35 kg and door widht upto 700 mm), with necessary accessories and screws etc. complete. dar-9.83, 5 providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with c.p. brass screws and washers complete. (17.31). 6 providing and fixing 600x120x5 mm glass self with edge round off, supported on anodiesd aluminium angle frame with c.p. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.(17.33). 7 providing and fixing toilet paper holderc.p. brass (17.34.1). 8 providing and fixing water closet squatting pan (indian type w.c. pan)with 100 mm sand cast iron p or s trep, 10 liter low level white p.v.c. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to is :7231 with all fittings and fixtures complete, including cutting and making good the walls andfloors wherever required white vitreous china orissa pang size 580x440 mm with integral type foot rests. dsr-17.1.1, 9 providing and fixing chlorinated polyyinyl chloride (cpvc) pipes, having thermal stability for hot & cold water supply and all cpvc plain & brass threated fittings including fixing the pipe with clamps at 1.00 m spacing. this includes joints of pipes & fitting with one step cpvc solventcement and testing of joints complete as per direction of engineer -in-charge. internal work -exposed on wall (25 mm nominal dia pipe )18.7.3, 10 providing and fixing g.i. pipe complete with g.i. fittings and clamps, i/c cutting and making good the walls etc. inernal work - exposed on wall ( 15 mm nominal bore ) 18.10.1 11 providing and fixing c.p.brass bib cock of approved quality conforming to is: 8931 15 mm nominal bore ( 18.49.1) 12 providing and fixing c.p.brass long nose bib cock of approved quality conforming to is standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) 13 providing and fixing c.p.brass long body bib cock of approved quality conforming to is standerd and weighing not less 690 gms. 15 mm nominal bore ( 18.51.1) 14 dismantling old plaster or skirtingracking out joint and cleaning the surface for plasterincluding disposal of rubbish to the dumping ground within 50 metars lead. dar no-15.56, 15 12 mm thick cement plaster with cement mortar in proportion of mix 1:4 (1 cement : 4 coarse sand). dar-13.4.1, 16 removing white or colour wash by scrapping and sand papering and preparing the surface smoothincluding necessary repairs to scratches etc. complete.dsr-13.88, 17 providing and applying white cement based putty of average thickness 1 mm. of approved brand and manufacture. over the plastered wall surface to prepare the surface even and smooth complete. (dsr-13.80), 18 wall painting with premium acrylic emulsion paint of interior grade, having voc (volatileorganic compound) content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. one coat, dsr.n0-13.83.1), rs-75.40) 19 wall painting with premium acrylic emulsion paint of interior grade, having voc (volatileorganic compound) content less than 50 grams/litre of approved brand and manufacture, lncluding applying additional coats wherever required, to achieve even shade and colour. two coat, dsr.n0-13.83.2), rs-112.80) 20 french spirit polishing one or more coats on old work. dsr-13.103.1, rs-177.58 21 painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two of more coatson new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. dsr.n0-13.62.1), 22 disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge. note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. dar-1.1.18,