tender for materials supply for the construction of anganawadi in ward 9 , supply of materials , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , coarse sand (zone iii) , portland cement , wall form panel 1250x450xmm , corner angle 45x45x5 mm 2.50 long , column clamp 450x1070 mm , prop 2 m (2-3.5m) , structural steel such as tees, angles, channels and r.s. joists , red oxide zinc chromate primer , adjustable telescopic prop 3 m (2.02-3.75m) , beam clamp 300-380 mm (450-1070 mm) , adjustable span eso+si (2.35-3.40) , stone aggregate(single size): 10 mm nominal size , stone for masonry work , mild steel round bar above 12 mm dia , twisted steel/deformed bars , solid blocks of size 40x20x20cm , solid blocks of size 40x20x15cm , fine sand (zone iv) , vitrified floor tile 60x60 cm , ceramic glazed tiles ist quality minimum thickness 5 mm in all colours shades and designs except burgundy, bottle green black , pink primer (for wood) , synthetic enamel paint in black or chocolate shade , iron hooks & eyes 100 mm , brass 100 mm mortice latch and lock with 6 levers without pair of handles , pair anodised aluminium lever handles for 100 mm mortice latch and lock , oxidised mild steel tower bolt (barrel type) 200x10 mm , oxidised mild steel screws 30 mm , anodised aluminium hanging type door stopper , chromium plated brass screws 25 mm , flats up to 10 mm in thickness , anjili wood scantls , anjili wood planks , float glass sheet of nominal thickness 4 mm (weight not less than 10 kg/sqm) , bright finished or black enameled mild steel butt hinges 100x58x1.90 mm , bright finished or black enameled mild steel butt hinges 50x37x1.50 mm , bright finished or black enameled mild steel screws 40 mm , bright finished or black enameled mild steel screws 20 mm , rawl plug 50 mm (designation 10 nos) , 48 mm x40 mmx1.5 mm thick factory made door frame of pvc extruded sections in white, grey or wooden finish , 24 mm thick factory made shutters with styles, rails and panels of pvc extruded sections in white, grey or wooden finish , black plastic seat (soild) with lid c.p.brass hinges and rubber buffers , vitreous china pedestal type wate closet , flushing cistern p.v.c. 10 lts capacity (low level) (white) (with fittings, accessories and flush pipe) , vitreous china flat back wash basin 550x400 mm , 15 mm c.p.brass tap , c.p. brass waste 32 mm , c.i. bracket for wash basin and sinks , stainless steel kitchen sink - without drain board 470x420 mm bowl depth 178 mm , polyethylene water storage tank with cover and suitable locking arrangemnet , one piece european water closet s concealed 510 x 295 x 520 mm with seat cover and fittings , vitreous china flat back wash basin 630x450 mm , ptmt - towel rail (600 mm) , second class teak wood in scantling , brass bib-cock-15 mm dia , material - 75 mm valve , float valve 20mm with rod , pvc pipe 50 mm outer dia.6kgf/cm2 , pvc pipe 110 mm outer dia 6kgf/cm2 , pvc pipe 15 mm outer dia 10kgf/cm2 , pvc pipe 63 mm outer dia . 6kgf/cm2 , acrylic exterior paint , exterior primer , wall form panel 1250x500 mm , corner angle 45x45x5 mm 1.50 m long , 100 mm channel shoulder 2.5 m long , double clip (bridge clip) , single clip , m.s. tube 40 mm dia please enable macros to view boq information