annual plan-pattiam gp project no. 225/26-installation of motor pump set and related equipments for panchayat own building-kannavam ayurveda hospital, vengalam anganwadi, kunninu thazhe anganwadi, muthiyanga no 79,vanitha shishuvihara sarovanam and cheerata samskarikanilayam.-general electrical work--- 1 water pump installation 2 1.21.2:supplying and fixing of following sizes of medium class pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.25 mm 3 90.6.10.1:supply and fixing of following sizes of light gauge pvc conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm 4 1.17.12:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.3 x 2.5 sq. mm 5 1.17.20:supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface / recessed steel/ pvc conduit as required.2 x 4 sq. mm 6 1.24.3:supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch 7 1.24.5:supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet 8 1.27.2:supplying and fixing following size/ modules, gi box alongwith modular base & cover plate for modular switches in recess etc as required.3 module (100mmx75mm) 9 90.6.6.1:supply and drawing frls pvc insulated & sheathed 650/1100 v grade 3 core copper conductor flat cable for submersible pump motor conforming to is 694 part i 1990 as required including giving necessary connections of the following sizes.1.50 sq mm 10 90.6.6.2:supply and drawing frls pvc insulated & sheathed 650/1100 v grade 3 core copper conductor flat cable for submersible pump motor conforming to is 694 part i 1990 as required including giving necessary connections of the following sizes.2.50 sq mm 11 90.12.10.2:supply & laying of dwc pipe in ordinary soil 0.75m below ground level including excavation50/38 mm or nearest size 12 od155600/2025-2026:supply. conveyance, laying and joining of25 mm size hdfe flexiblepipe 6 to10 kg cm approved make with required accessories as delivery pipe using required proofing materials etc.as required 13 od155599/2025-2026:providing and fixing pvc pipes, including fixing the pipe with clamps at one m spacing. this include joints the pipe&fitting with one step pvc solvent cement and testing the joints complete as per the directionof engineer incharge, 25mm dia,6/10 kgf/cm2 as required. 14 od155589/2025-2026: supply and providing 25 mm stainless hose clip 15 od155593/2025-2026: supply and providing 25 mm hose holder 16 od155598/2025-2026: supply and providing 25 mm gm non return valve heavy duty (vertical/horizondal as required. 17 od190455/2025-2026:supply ,installation, testing and commissioning of 1 hp single phase bore well motor pump set (deccan/ or eqvt.) 30-62 mt. head 8 stage with starter, delivery size 25 mm using leak proof materials and suspended on10/12mm stainless steel rope/nylon rope including fixing and connected delivery pipeone by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including starter and giving connection, trail run etc.as per the direction at site. 18 od190456/2025-2026:supply ,installation, testing and commissioning of 1 hp single phase bore well motor pump set (deccan/ or eqvt.) 47-95 mt. head 15 stage with starter, delivery size 25 mm using leak proof materials and suspended on10/12mm stainless steel rope/nylon rope including fixing and connected delivery pipeone by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including starter and giving connection, trail run etc.as per the direction at site. 19 od170991/2025-2026:supply ,installation, testing and commissioning of 1hp single phase submersible motor pump set stainless steel impeller(deccan premium or eqvt.) 33 m head with starter, delivery size 25 mm using leak proof materials and suspended on 1 run 10/12mm stainless steel rope/nylon rope including fixing and connected delivery pipeone by one to the motor up to the bottom of the well using leak proof materials as required with necessary supports on both sides of the motor including giving connection and trail run etc. as per the direction at site. 20 od155590/2025-2026:supply and laying 12mm or nearest size nylon rope 21 2.3.3:supplying and fixing following way, single pole and neutral, sheet steel, mcb distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (but without mcb/rccb/isolator) 12 way, double door 22 2.10.1:supplying and fixing 5a to 32 a rating, 240/415 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. single pole 23 2.12.1:supplying and fixing following rating, double pole, 240 volts, isolator in the existing mcb db complete with connections, testing and commissioning etc. as required.40 amps 24 2.14.1:supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (rccb), having a sensitivity current 30 milli amperes in the existing mcb db complete with connections, testing and commissioning etc. as required. 25 amps 25 5.4:earthing with g.i. earth plate 600 mm x 600 mm x 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. 26 5.9:supplying and laying 25 mm x 5 mm g.i strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with g.i. nut, bolt, spring, washer etc. as required.(jointing shall be done by overlapping and with 2 sets of g.i. nut bolt & spring washer spaced at 50mm) 27 2.10.3:supplying and fixing 5a to 32 a rating, 240/415 volts, 10 ka, c curve, miniature circuit breaker suitable for inductive load of following poles in the existing mcb db complete with connections, testing and commissioning etc. as required. double pole 28 od155595/2025-2026:supply and installation of switch gear units in sheet steel enclosure complete with handle assembly, door interlock and pad locking arrangement of 32 a,415v,50hz spn with25a hrc fuse fixed on suitable size cubicle box made out 1.60 mm crca sheet of suitable size to match the switch gear and enabling the cables to be connected without strain, painted with 2 coats of synthetic enamel paint over a coat of red oxide primer & with drilled holes and mounting to the switch gear etc as required. 29 od155587/2025-2026:supply & installation of dust and vermin proof, wall mounting, single phase syntax meter box (gs mb-3525) cm for fixing kseb meter,fuse units, ct,mcb,timeretc, hinged door construction , providing vision panel for the meter compartment, knock out for cable entry and exit etc.as required including fixing to wall and making good the wall as required.. 30 90.16.1.2:supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 swg) 31 90.16.1.3:supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 swg) 32 90.16.2.5:supply and laying of the following sizes of b class gipipe laid 0.6 m below ground level including excavating trench of suitable size and refilling etc, as required.50 mm dia. g.i. pipe (medium class) 33 90.16.5.3:supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 swg) 34 od155591/2025-2026:supply and providing the following sizes of bolt and nut with washers on the existing ms box / earth bus etc. as required including drilling necessary holes as required 25 x 3mm brass bolt & nut 35 od155596/2025-2026: supply and providing 32 a hrc fuse with 25 a fuse link and giving connection on existing panel board. 36 od155597/2025-2026:supply and providing 32-a neutral link mounted on dmc/ smc base and giving connection on existing panel board. 37 90.14.5:supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board