lab furniture of central instrumentation facility, central university of rajasthan , wall mount cabinets with metal door , sefa-8 standards heavy duty wall mount cabinets: sefa-8 standards heavy duty cabinet body shall be in 1.2mm thick material of construction: 1.2 mm gi sheet with ss 304 hinges and handles. epoxy powder coating of 60 -80 microns. - size - 600mmlx450mmdx750mmh. provison of lock is required. these units will be fitted in the service areas of the drawing. , under bench storage units (qty as per drawing) sefa-8 standards heavy duty under cabinets & drawers: sefa-8 standards heavy duty under module (cabinet body shall be in 1.2mm thick and drawer front & shutter shall be in 1 mm thick), the cabinet should have adjustable height shelf. the storage cabinets should be made of crca 20 gauge. (tata/ jindal/sail/jsw in panel construction. cabinets should have sandwitched doors & drawers filled with pcapsal sheet should be lined on the edges of doors and drawers for sound deadning. the cabinets should be interconnected with spacer which strengthens over all structure of the table / bench. ss fasteners should be used at exposed area inside the cabinets.. the drawer glides should be telescopic glides which gives strength with smooth move base cabinet of 600 mm with 1 drawer & 2 shutter with lock base cabinet 750mmwith 1 drawer & 2 shutter with lock base cabinet 900w1 drawer & 1 shutter with lock base cabinet 450mm1 drawer & 1 shutter with lock , modular sink unit ( corner unit ) specification of material of construction is same as under cabinets. the front panel should have single door with handle. sink bowl and bottle trap should be of polypropylene. one way ss faucet. , filler panels (qty as per drawing) specification of material of construction is same as under cabinets. , frame assembly for wall cabinet bench (qty as per drawing) material: steel tubing, of hollow sections conforming to standards is code: square pipe with a cross-section of 30mm x 30mm and a minimum thickness of 1.2 to1,6 mm. finish: powder coating: highly corrosion-resistant epoxy powder coating, typically 60-80 microns thick,, with pre-treatment for better adhesion. . legs: adjustable levelling feet: required for uneven flooring, typically with a tolerance of -5mm to +20mm. , 17mm (+/-1) thick black granite (qty as per drawing) , garment locker 1000mmlx450mmdx2100mmh, made of ss 304, thickness of sheet is 1.2 mm and finish is matt. total 9nos. of lockers of equal size is required with provision of lock. , shoe rack 1200mmlx300mmdx600mmh - two tier ss 304 shoe rack. made of 30mmx30mmx1.2mm pipe. , hardware fittings a) hinges :- hettich/haffele/godrej. b) handle :- ss304 matt finish d handle / aluminium flush handle. c) screw :- all s.s. 304 visible screws. d) lock :- hafele / hettich / godrej make with pair of keys. e) drawer channel :- hettich / ebco / haffele make telescopic drawer slides – 45kgs