infracture facilities to thirupparankundram union office in madurai district under scpar (21-22) infracture facilities to thirupparankundram union office in madurai district unde , bdo table & engineer room : the main table of size : 2l00mm (l) x10s0mm (d) x 750mm (h) and side table of size 1200mm x 4s0mm x 750mm (h) and back credenza of size 1200mm x 450mm x 750mm(h) the table top made out of 25mm thick particle board and 0.6mm decorative laminatefinish with postformed finish. and back credenza having storage made out of 18mm thick pre laminate board duly edge banded wieh 2mm thick pvc edge beeding swing type shutters and lock andkey arrangments. having a mobile pedestal of size 400x 450x 640mm , deputy bdooverseer& l.fi audit table : the main table of size : 1600mm (l) x 600mm (d) x 750mm (h) and h aving side table cum storage unit of size 900mm x 450mm x 750mm(h) the side table having a two drawer on top bottom with swing type shutters with lock and key arrangements. the table top made out of 2smm thick particle board and 0.6mm decorative laminate finish with postformedfinish , modular workstationfor section office: - 75mm thick :fabricated out of exclusive aluminum sections with the followingspecifications, (a) all the aluminum sections will be of 1.8 mm to 2 mm thick i.e., depends on the load bearing requirement. (b) the top cover & end cover will be of 7s mm breadth. (c) the electrical raceway coverwill be of 100 mm width & 9 mm thick pre laminated / laminated particle board. (d) the tiles will be provided on both sides of the frame are fabricated out of 9 mm thick pre laminated board for tiles & mdf board for white marker board & magnetic fabric board. (e) the two way, three way & four way pillars will be fabricated out of 2 mm thick, 75 mm, square aluminum sections. (f)all the frames will he rnn nerterl using bolt& nuts.(g) all the aluminium sections will be duly powder coated in approved shade after necessary treatment. table top and divider panel made of 2