tender for av/291998 construction of thattankunnu anganavadi w1--- 1 stone for masonry work 2 portland cement 3 coarse sand (zone iii) 4 structural steel such as tees, angles, channels and r.s. joists 5 red oxide zinc chromate primer 6 sundries 7 adjustable telescopic prop 3 m (2.02-3.75m) 8 beam clamp 300-380 mm (450-1070 mm) 9 twisted steel/deformed bars 10 second class kail wood in planks 11 second class kail wood in scantling 12 hollock ballies 125 mm diameter 13 adjustable span eso+si (2.35-3.40) 14 wall form panel 1250x450xmm 15 corner angle 45x45x5 mm 2.50 long 16 column clamp 450x1070 mm 17 prop 2 m (2-3.5m) 18 wall form panel 1250x500 mm 19 corner angle 45x45x5 mm 1.50 m long 20 100 mm channel shoulder 2.5 m long 21 double clip (bridge clip) 22 single clip 23 m.s. tube 40 mm dia 24 laterite stone of size 35x20x20cm 25 laterate stone of size 40x20x15cm 26 solid blocks of size 30x20x15cm 27 stone aggregate(single size):20 mm nominal size 28 stone aggregate(single size): 10 mm nominal size 29 hire charges of concrete mixer 0.25 to 0.40 cum with hopper 30 vibrator (needle type 40 mm) 31 royalty for good earth 32 pvc pipe 110 mm outer dia 6kgf/cm2