tender for vat point at (w-15) under dankuni municipality under swm fund- 1 earth work in excavation of foundation trenches ordrains, including removing, spreading or stacking the spoils within a lead of 75 m. as directed. the item includes necessary trimming the sides of trenches, levelling, dressing and ramming thebottom, bailing out water as required complete.(a) depth of excavation not exceeding 1,500 mm. pocket cutting 2 earth work in filling in foundation trenches or plinthwith good earth, in layers not exceeding 150 mm.including watering and ramming etc. layer by layercomplete. (payment to be made on the basis ofmeasurement of finished quantity of work)(a) with earth obtained from excavation of foundation. 3 ordinary cement concrete (mix 1:1.5:3) withgraded stone chips (20 mm nominal size)excluding shuttering and reinforcement ifany, in ground floor as per relevant is codes. i) pakur variety 4 m.s. structural works with hollow sections (square or rectangular shape) conforming to is: 806-1968 & is:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of engineer-in-charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to is: 816-1969 & is: 9595 using electrodes of approved make and brand conforming to is:814- 2004, haulage, hoisting and erection all complete. the rate includes the cost of all m.s. hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. ii) for other structural works like galleries etc. 80mm x 80 mm 6mm thk 5 50mm x 50 mm 5 mm thk 6 (a) priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 7 painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) on steel or other metal surface :with super gloss (hi-gloss) -(ii) two coats (white in shade) 8 a) m.s.or w.i. ornamental grill of approved design jointscontinuously welded with m.s, w.i. flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor (ii) grill weighing above 16 kg./sq.mtr and above 9 galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia j or l hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (payment to be made on area of finished work)(gci sheet to be supplied by contractor)(ii) in wall:c) with 0.80 mm thick sheet 10 g.s.t (sgst 9%+cgst 9%) 11 cess (1%)