maintenance of different schemes under rws/ridf/arws/nrwp/ sh: providing fitting fixing of electrical equipments for smooth running of dtw and sbdtw schemes under dws sub-division, badharghat during the year 2025-26(gr.i).-providing & fitting fixing steel sheet enclosed switch fuse unit (suitable for din fuses), triple pole with neutral link (tpn), 415/500 volt, l&t/havels/bch make etc. complete as per specification & direction of the eng-in-charge. 2 i) 63 ams 3 ii) 100 ams 4 supplying & fitting fixing of single phase motor starter panel unit 3hp/ capacity comprise with 2 pole conductor, over load relay, capacitor, volts meter, amps meter of bch/l&t make with necessary copper wire etc complete as per direction of eng-in-charge. 5 supplying & fitting fixing of 32 amps single phase main switch of bch/l&t/havel’s make in/c cost of necessary copper wire wiring complete as per direction of eng-in-charge. 6 providing and fitting fixing of moving iron type, range 0-500 v, 96mm x 96 mm size ac volt meter (l & t / ae make) with selector switch as a electrical instrument of the panel board as per specification and direction of the engineer-in-charge. 7 providing and fitting fixing with pvc insulated single core multistrand copper cable conforming to is : 694 for inter connection with all electrical equipments of the panel board as per specification and direction of the engineer-in-charge. 8 i) 10 sqm 9 ii) 16 sqm 10 providing and fitting fixing of moving iron type, range 0-100/0-200 amps, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification & direction of the eng-in-charge. 11 supplying & fitting fixing submersible pump starter for single phase motor of 2 hp relay range. 12 providing and fitting fixing of fully automatic starter delta type motor starter (3 ph, 50 hz, 415 v) in steel sheet enclosure with contractors and timer etc. complete suitable for submersible pump l & t, bch, abb make as per specification and direction of the engineer-in-charge. 13 i) 25 hp/18.5 kw relay range within 13-21 + 10% 14 ii) 35 hp/26 kw relay range within 20-32 + 10% 15 iii) 50 hp/37 kw relay range within 28-42 + 10% 16 providing & fitting fixing3 phase indicating lamp fitted with panel board with three different colour lamps with batten holder completeas per specification & direction of the eng-in-charge. 17 providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood / plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post (size 2 inch x 2 inchx 9 feet), nuts & bolts etc. for irrection of the same by1:1.5:3 cement concrete casting (1 feet x 1 feet x 2 feet) below the ground level and paintingtwo ormore coats & plastic paint as per specification & direction of the engineer-in-charge.