supply of welding hand gloves size 16 (xl)welding hand gloves size 16 (xl),welding hand gloves size 16 (xl), heavy duty chrome leather, heat resistant, kevlar stitched, fully welted fingers, and reinforced thumb with inner lining suitable for mmaw & co2 (mig/mag) welding w ork. note: 1. accepted make; esab /ador / 3m /messer / keean/acme/mallcom. item to be procure from oem or their authorized dealers only. 2. compliance: the welding gloves shall comply with is 2573:2023 (f or construction requirements), en12477:2001+a1:2005, en 388:2016+a1:2018 (mechanical risks), and en 407:2020 (thermal hazards), en iso 21420:2020 standards. compliance certificates or test reports from bi s-recognized /nabl accredited laboratories shall be submitted along with the supply. 3. performance value s: the gloves shall preferably comply with the performance values of en 407: 433x4x or higher, en 388: 42 24 or higher, and en 12477 (type a) requirements. 4. size: the term xl (size 10 as per en iso 21420) shall refer to gloves with a hand circumference of 254 mm (10 inches) and a hand length of 204 mm ( 8 inches). for welding applications, an overall glove length of 14-16 inches is acceptable to ensure adequate hand an d forearm protection. 5. sample approval: the supplier shall provide four samples of the offered welding gl oves for inspection and approval by the consignee prior to commencement of bulk supply. bulk supply shall be accepted only after the consignees approval of the submitted samples. [ warranty period: 30 months after the date of delivery ] [quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ] => limited