tender for supply of equipment / material, design, erection, testing, commissioning for i) providing 11 kv ,63 kva s/stn bhangwar 2nd in (e) section bane di hatti under electrical sub division hpsebl ranital. (t. s. no. 065/2024-25, s.a. 472710/-) (w.b.s.- 32100427-001-kgr-dtr-015). ii) providing 3-phase lt line from prop.11/0.4 kv, 63 kva s/stn bhangwar 2nd in (e) section bane di hatti under electrical sub division hpsebl ranital.. (t. s. no. 067/2024-25, s.a. 96482/-) (w.b.s.- 32100427-001-kgr-lt-010).-material/erection of 11/0.4kv,63 kva s/stn. bhangwar 2 prov.x-arm: [channel iron (100x50x6 mm), length : 2800 mm x 2 nos] for incomer line 3 prov.ms angle iron (50x50x6 mm), length: (2800 mm) x1 nos for las 4 prov.x-arm: [channel iron (75x40x6 mm), length : (2800 mm x 4 nos] for supporting do fuse unit & go switch 5 prov.x-arm:[channel iron (100x50x6 mm), length : 2800 mm x 2 nos]fortransformer bed 6 prov.x-arm [channel iron (100x50x6 mm), length : (460mm) x 2 nos for supporting main channel of transformer] 7 prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos 8 prov.ms angle iron (35x35x6 mm), length : (460 ) x 2 nos 9 prov.ms angle iron(50x50x6 mm), length : (950 mm) x 2 nos for bed knee bracing 10 prov.ms angle iron (50x50x6 mm), length : (2800 mm) x 2 nos 11 prov.ms angle iron(50x50x6 mm), length : (450 mm) x 1 nos 12 go switch handle supporting: [channel iron (75x40x6 mm), length : 460 mm 13 prov.d.o fuse unit 14 prov.surge arrester, 9 kv station class(porcelain type) 15 discs insulator st (comprising 1 no. discporcelan, bs, 12 kv, 90 kn) including dead end clamps etc.) 16 prov.pipe earthing set 17 half clamp (m.s. flat 50x6 mm) 18 full clamps (m.s. flat 50x6 mm) 19 prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16 mm φ or more(with flat and spring washers)] 20 prov. aluminium thimble 21 prov.barbed wire 22 prov.lt cable (3.5 core) 120 mm² 23 prov.energy meter (3-phase, 4-wire) dlms compliant 100/5 a ct type for 63 kva transformer 24 a). aluminium paint. 25 b). red oxide 26 prov. plinth for double pole (100kva s/stn.) structure complete i/c excavation of pit, boulder filling upto ground level and making plinth of c.c. 1:5:10, of size 10x3x2.5. 27 erection charges complete in all respect 28 transportation charges complete in all respect 29 (b)material/erection of 3 - phase lt line bhangwar 30 prov.muffs with concerete filling (2000 mm) 31 prov.earth knob 32 prov. full clamps (m.s. flat 50x6 mm) 33 prov.earthing set complete 34 prov.earth wire (gi, 8 swg) {additional 1% (sag and wastage)} @ 0.102kg/m 35 prov.spool tie 36 prov.nuts and bolts of various sizes (galvanised / coated) [preferably 16mm φ or more (with flat and spring washers)] 37 prov.aluminium paint 38 prov. spiral pvc spacer 39 transportation charges complete in all respect 40 erection chargescomplete in all respect