tender for mgnrega- material supply mgnrega- material supply in various locations of kanjirapuzha gp , laying and jointing pvc pipe. heading , 100 mm channel shoulder 2.5 m long , bitumen washer , coarse sand (zone iii) , corner angle 45x45x5 mm 1.50 m long , double clip (bridge clip) , g.i pipes 50 mm dia , g.i. plain washer thick , galvanised steel j or l hooks 8 mm dia , galvanised wire mesh of average width of aperture 1.4 and nominal dia. of wire 0.63 mm , hire charges of concrete mixer 0.25 to 0.40 cum with hopper , m.s. tube 40 mm dia , mild steel tubes hot finished welded type , portland cement , precoated aluminium trafford sheet 0.450mm thick , quarry waste , red oxide zinc chromate primer , safeda ballies 125 mm diameter , second class kail wood in planks , second class kail wood in scantling , single clip , stone aggregate(single size): 10 mm nominal size , stone aggregate(single size): 40 mm nominal size , stone aggregate(single size):20 mm nominal size , sundries , twisted steel/deformed bars , vibrator (needle type 40 mm) , wall form panel 1250x500 mm , welding by electric plant , wire nails , pvc pipe 75 mm outer dia 6kgf/cm2 , green net 75% shade , polyurethene bags , interlocking c.c. paver block (80 mm thick, m-30) , fine sand (zone iv)