tender for annual plan-2024-25pudur gppro.no:29 ward 3-kolappadikali pradesham lift irrigation-general civil work - lift irrigation 2 od262548/2024-2025:site investigation charges to identify a suitable site for digging borewell including all charges 3 od262546/2024-2025:digging borewell 150mm dia at the proposed site up to getting sufficientwater yield as per standard specification uincluding all charges complete 4 od262550/2024-2025:providing casing pipe 180mm dia 6kg/cm2 as per standard specification including all charges complete 5 od262544/2024-2025:supplying and fixing pvc end cap of 180mm dia including all charges 6 od262547/2024-2025:supply and erection of readymade ferrocement pumphouse of size 1.50x1.50x2.10m as per specification.rcc post shall be fixed in pcc 1:3:6 of size 45x45x45cm,foundation alroundwith solid block masonry with cm1:6 of 30x40cm, size ferrocement wall of 1.50mx2.10m of thickness 25mm, ferrocement traingular type roof made of ferrocement slab of thickness 25mm,ms door of size 75x210cm with 1mm thick ms sheet and suitable gi framesand painting with two coats ofsynthetic enamel paint over a coat of iron primer with suitable gi frames and painting with two coats of synthetic enamel paint over a coat of iron primer with suitable locking arrangement and apad lock of 5 lever ms ventilatorof size 60x45cm, flooring with cc 1;4;8, 75mm thick and plastered over 12mm thick cement plaster 1;4 and neat cement flushing coat and wall surfaces and roof shall be painted with two coats of exterior emulsion paint over coat of primer. 7 od262545/2024-2025:conducting yield test to ascertain the yield of tube well by groundwater department including all charges complete 8 od262549/2024-2025: supply install test and commissioning of tube well submerssible motor and pump set up to and including 10hp in existing tube well with following: a) 50mm dia upvc pipe b) 3 core 4sqmm upvc cable c) nylon rope for hanging the motor d) gi clamp e) non return valve f) 50mm gi bend , 50mm pipe upto non return valve g)panel board made of powder coated gi sheet with suitable frame work with isi marked dol starter , main switch 440volts , 100ma 4 pole elcb , capacitor , selector switch-2 nos, ammetter ,voltmeter,indicator lamp -3nos etc(rate per hp) 9 18.59.1:providing and fixing c.i double acting air valve of approved quality with bolts, nuts, rubber insertion etc. complete ( the tail pieces, tapers etc. if required will be paid separately):50 mm dia 10 18.17.4:providing and fixing gun metal gate valve with c.i. wheel of approved quality (screwed end) :50 mm nominal bore 11 18.19.4.1:providing and fixing gun metal non-return valve of approved quality (screwed end):50 mm nominal borehorizontal 12 50.18.9.7.1:providing and fixing pvc pipes includings of pipes with one step pvc solvent cement, trenching refilling & testing of joints complete as per direction of engineer in charge. 63 mm dia 6kgf/cm2