tender for plastic booth at various point of gp-structural works with hollow sections (square s: 806-1968 & is:1161-1998) connected to one another with bracket, gusset, cicat as per design, drawing & direction of engineer-in-charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to is: 816-1969 & 15: 9595 using electrodes of approved make and brand conforming to is:814-2004, haulage, hoisting and erection all complete. the rate includes the cost of all m.s. hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. payment to be made on the basis of calculated weight of structural memebrs of ms holow section as specified in relevant is code in finished work. payment for gusset, bracket, clest may be made by adding the actual weight of such items with weight of finished structural members. the rates are considered for a hight of erection 8 m./2nd floor level from the ground. add 1.5% extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. a) span up to 12 mtr 25x25x3.2-12mtr @ 1.98 kg/mtr 23.76 kg 49.5x49.5x2.9-7mtr @ 4.07 kg/mtr = 28.49 kg 38x38x2.9-12mtr @3.03 kg/mtr - 36.36 kg total 88.61 kg 0.0.88 mt 2 supplying, fitting, fixing, chain link fencing of approved quality with r.c.c posts wooden posts or iron posts by means of galvanised c clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 8.w.g which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc. (1) 50 mm. x 50 mm. x 8 g 3 supplying, fitting & fixing zn-al alloy (55% al & 45% zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yiekl strength of 550 mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, epdm washer 16 mm dia & 3 mm the washer etc. complete with 150 mm end lap and one corrugation minimum side lap (payment to be made on area of finished work). a) with 0.5 mm thick sheet 4 galvanised plain sheet works (excluding supporting framework) fitted and fixed with 6 mm. dia j-or l hook-bolts and nuts, sheet-bolts, limpet and bitumen washers and putty with 150 tum. end lap & 50 mm minimum side lap complete. (b) in wall: with 0.63 mm. sheets. 2 x (1.2 x 1.7) 4.08 sqm 1.52 x 1.7-26 sqm 5 oil paint color and writing, iec massage etc. all completed.