tender for providing and installation of single phase motor pump at various places in ward no. 33; 1 supplying & installation of energy efficiant five star bee rating isi marked requiredcapacity single phase, 50 hz, 220v, deep well submersible pump stainless steel body, suitable for 4/6 tube well with control panel starter suitable for submersible pump with dry run protection, connections, including submersible flat cable isi marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. the size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, ss/ nylon wire rope. make - kirloskar, falcon, texmo, luby & any isi standard make)2 hp head mt. 163-58 discharge lpm 10-45mpphd sor i sep. 2023 11.2/164 2 supplying and laying of approved make nylon rope 12mm thick complete with binding for support of pump and motormpphdsor no. 11.6/165 3 providing, laying, jointing & field testing of pe pipes made from 100% virgin material (earlier know as hight density polyethylene pipes, pe 100) conforming to is 4984/ 14151/ 12786/ 13488 with necessary jointing material like mechanical connector or jointing pipes by heating the ends of pipes with the help of teflon coated electric mirror/ heater to the required temperature and then mechanically pressing the ends together against each other, to form a monolithic & leak proof joint by thermosetting process. it may be required to be done with jacks/hydraulic jacks/ but fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed)40 mm dia 10k/cm mpphdsor no.2.1.1/32 4 providing and fixing following check (non-return) valves class ii, conforming to is-778/1984 (reaffirmed 2005) female ends, tested to 21.00 kg/cm2.32mm diampphd sor no. 3.8.4/49 5 providing and fixing g. i. bend 900 in g.i. pipe line including cutting threading testing etc. complete (old work) conforming to is 187932mm diampphd sor. 3.27.4/49