tender for estimate for feeder separation of 11 kv ratwa abadi feeder under mau d/c in (o&m) dn. gohad - 140 kg.,8.0 mtrs. long pcc pole 2 11 kv pin insulator polymer composit (5 kn) 3 aaac raccoon conductor 0.075 sq. inch (80 sq.mm. al.eq.) 4 m s angle 65x65x6 mm 5 11 kv(45kn) composite polymer disc insulators 6 11 kv strain hardware (t&c type) fittings 7 m s channel 100x50x6 mm 8 back clamp for 140 kg pcc pole ms flat 50x6 mm 9 earthing coil of 115 turns of 50 mm.dia and 2.5 mtr. lead of 4.0 mm g.i wire 10 stay set complete without stay wire 16 mm. (painted) 11 stay wire 7/3.15 mm.(7/10 swg) 12 clamp for 140 kg pcc pole ms flat 50x6 mm 13 stay insulators 90x65mm 14 back filling of poles with boulders. 15 g.i. wires 4.0 mm. (8 swg) 16 stone block/pre cast block for base pedding(450x450x75mm) 17 concreting of stay (16 mm / 12 mm) @ 0.2 cmt. per stay 18 red oxide paint 19 aluminium paint 20 danger boards enamelled 11 kv 21 aluminium binding wire and tape 22 m.s.nuts with bolts 23 anti climbing devices ( barbed wire 2.24 mm dia, 14 swg) 24 horizontal & cross bracing set of ms angle of 50x50x6 mm for 8 ft (2.4 mtr ) centre dp 25 concreting of structures & foundation (1:3:6) 26 earthing for pcc pole 4.00 mm-8 swg g.i wire- 0.8 kg, per pole 27 11 kv single pole cut point fitting 100x50x6 mm channel 28 labour charge for company side material 29 labourcharge for contractor side material 30 gst 18%